Piantor 42 case redesign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the piantor pro design from beekeeb. This is for the original PCB with the trrs connectors.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is sort of a downmix of the Beekeeb Piantor Pro case. I like what they did for the case updates so I made them for the original Piantor pcbs. Adjusted the port placement, changed the top to fully overhang the bottom, and added a top screw system for attaching the top and bottom.
Todo:
The top model has the top of the case level with the top of the choc switches. I'm not a fan, having lived with this for a while. I think I want to bring the top surface a few mm closer to the PCB. If your keycaps are lower than the switch top when fully pressed, you might not like it either.
I need to create a tenting base and 1.3in display versions.
Also, the fast gold print is not my finest print, but it was fast and has been a good test run. :)