Dante for 6 mm Scale Wargames - FDM Printable Without Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weapon system miniature fully printable in FDM without supports for 6 mm scale wargames.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 559
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A model of weapon system inspired by Czechoslovak howitzer DANA. Model on the photo was printed using Prusa MK4 with 0.25 nozzle, FillamentPM RePLA and with 0.07 mm layer height.
Model Usage
The model can be used for any 6 mm scale war game like Battletech, or Warhammer 40k in Epic scale and other GrimDark variants, or for modern 20th century battle.
Printing Guide
I have created the model with FDM printing in mind (as I do not have adequate safe space for a resin printer), thus the model is composed of several parts that are printed separately and then assembled and glued together. As the model is in 6 mm scale, parts are tiny and precise nozzle (~0.2 mm) is required.
General Settings
- Material: Any quality grey PLA tested and recomended
- Nozzle: 0.2/0.25 tested and required
- Layer Height: 0.07 or smaller tested and required
- Supports: not required
- Brim: not required
- Infill: 5 % honeycomb tested and recommended
- Speed: As with any other minis, slower is better even with modern IS capable printer
Assembly Guide
TODO. For the time being, use whole model as reference, it is not hard to assemble.