3760 modeli
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size
If you're a fan of IKEA furniture, you may have encountered a situation where you have an old and a new version of the same product, and they don't quite match up. This was the case for me when I had both an old and a new IKEA KALLAX 2x2,…
This clamp is designed for 16mm pvc conduits both flexible and rigid ones. Ideal for installing cabling for ceiling lightning. Can be printed in PLA and PETG without issues. It snaps thightly in place and can be removed with some force.…
Hi, I designed this bottle holder to keep my large 1.5l Camelbak bottles in reach, without the danger of throwing them of my bedside table at night. It fits 1.5l bottles up to 100mm and large cups that are at least 100mm. Bottles that are…
Collection of Gridfinity basic cups height 6 (46mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This fastener is sized for a 6mm hole, with a 14.1mm head diameter. It can be scaled as needed. The model is based on the dimensions of Honda part no. 90683-GR1-003. I used it to attach body panels on a Honda CBR929RR. Compared to other…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Recommendations It is recommended to print the models in PETG because the lid includes thin tabs which might break off if layer adhesion is bad. Print Settings Layer height: 0.25mm Perimeters: 2 Bottom layers: 3 Top layers: 4 Infill: 0%…
Variants for 1,7,13,19,31,37,55,61, 73 and 94 bits.
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
Simple interface plate with 4 locking lugs on one side and a 17mm ball socket on the other. Quick and simple in PLA, will likely build one in PET-G in coming weeks. Overture Easy Black PLA 6 walls, 25% infill, Exterior to interior…
The backbone of Republic forces, the Anvil takes a beating while blitzing or occupying enemy territory. Supportless and easy to print on FDM, this 6mm mech prints in just 2 pieces! The bottom usually prints very easily but the top…
“Cutting-edge, lethal, and the first choice for every security firm with a big job and enough scratch” I'm happy to share my very first mech model since I moved to blender :) Tested for FDM but could conceivably print in resin. One piece,…
(Re-upped these because Thingiverse continues to be retarded and won't re-instate the availability of the original thing. For a site the relies upon content creators to give their efforts for free, for its profit model, they really are…
The boiler is a deeply outdated mech used by returned Exoplanetary Colonist to support their alien allies. Supportless and easy to print on FDM, this 6mm mech prints in just 2 pieces! The bottom usually prints very easily but the top…
I modified the body of the crossbow so that it is able to shoot 36mm finishing nails. I also added a handle to the main body, and increased the thickness of the crossbow arms. I also added a window so you can see how many shots are left.…
platzsparender Clip für die parallele Führung von 2 Leitungen/Kabeln a 6mm² einfach zu öffnen und zu verschließen in einteiliger Ausführung. Kabeldurchmesser ca. 6mm Gedruckt in PETG, in PLA nicht getestet, könnte aber wegen der fehlenden…
I created this useable model off a hard to find existing cartridge. I then modified it to best work within the constraints of 3D printing capabilities. the result is a working model that can be used in any of the older KIEV model cameras.…
A theatre building remix for a generic SciFi setting, at 6mm scale. (Funnily enough, CaptainFathom just re-uploaded these. I've been working on repairing a few of these to make them suitable for 3D printing.) I've added extra detail and…
Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 91mm Victorinox SAK. It will only work with 91mm Victorinox knives, but I also made one for 111mm knives. I tried to make it as durable and universal as possible, and it…
These hold-down pins are a simple solution to a common problem: keeping your materials secure and perfectly aligned on your Creality laser cutter’s honeycomb bed. They're designed to fit snugly within the honeycomb cells, providing a…
my own creation for hex wall organiser that can be used for holding a blade fuse box or something else
This is a 2 part 6mm ARC Cartridge Insert for Milwaukee Packout ( 48-22-8435 ) case. Typically, when participating in a Precision Rifle Match (PRS) or attending a distance rifle course, you need to bring a fair amount of ammunition. This…
I love sharks! There's just something fascinating about these fish! :) 3mf provided. Holes for eyes should appear in print preview after slicing. No brim or supports were used to print. Easier to print than finding Nemo. :) Update: STL…
This is a simple, cleanly designed tube model with an outer diameter of 16mm, a 1mm wall thickness, and a total length of 40mm. It’s ideal for use in prototyping, cable routing, lightweight structural supports, or custom hobby projects.…
platzsparender Clip für die parallele Führung von 4 Leitungen/Kabeln a 6mm² in Reihe einfach zu öffnen und zu verschließen in einteiliger Ausführung. Kabeldurchmesser ca. 6mm Gedruckt in PETG, in PLA nicht getestet, könnte aber wegen der…
Ends caps to fit in 16 x 16mm angled aluminium extrusions for LED-strips. The LED-bar can get warm, PLA is not recommended as a material to print with. Tight fitting - make sure your printer and extruder are accurate/calibrated.
Join two ends of 16mm corrugated plastic conduit together
This rack system is specifically designed for airbrush artists using bottles that are slightly larger than standard Vallejo sizes. It is a perfect fit for 20ml Homy Arty bottles or any bottle with a 26mm outer diameter . The system…
I love the model made by Jallim but I wanted the magazine to be removable without any kind of resistence, so I made a Version with Magnets Important: The magnets sizes only work if you scale the model up to 338% otherwise it wont work.…
platzsparender Clip für die parallele Führung von 4 Leitungen/Kabeln a 6mm² einfach zu öffnen und zu verschließen in einteiliger Ausführung. Kabeldurchmesser ca. 6mm Gedruckt in PETG, in PLA nicht getestet, könnte aber wegen der fehlenden…
A 359° Rosette for heating pipes with a diameter of 16mm. Just bend it up for mounting. No screws and clips necessary absolutely safe from vacuum cleaner rammers. :D You should print it with PETG and 100% infill Print Settings Supports:…
Larger button for 6mm tactile buttons Recommendations: PETG 0.15mm layer height
Entirely printable BCAR with various options for rollers and angles. 5 ,6 ,7 ,8 ,10 ,12 , 15 degree options and more Flat, rounded, or V shaped rollers Additional crush by aligning the shroud to press rollers in. Make sure the rollers can…
Update: New edition with more uniform design than my more experimental original ones I made for my own use. This version uses the same spacing for the connectors and is easier to re-organize. 36 mm & 46 mm holders for MrHobby and Tamiya…
This bigger version fits some slightly larger but common 7-piece dice sets. See my previous remix (based on 3DCentralVA's and the same size as that one) for other changes. Printing tips: Tray: The version of the tray marked "support-free"…
Simple mount for 12V PC. Diameter of the fans is 120 mm. V2 is for better grip on the pole. The old design was very fragile.You can change the design in FreeCAD. I used threaded inserts.
These knobs have 6mm inner diameter and 18 / 30 / 40 outer diameters. You can use something like Pritt Multi Tack to hold them in place. Category: Audio
The model features 2.4mm thick walls, making it suitable for printing with 0.4mm and 0.6mm nozzles. It was designed entirely from scratch! Inspired by: [Thingiverse Design](https://www.thingiverse.com/thing:4878747) Since I required a…
Inevitably, I lost a few caps for my USB drives, so I created a couple of replacements. I have included two different versions, should you have a standard-length drive or something a little longer (like my Vansuny drive). I've only tried…
This is a simple cap for the 6mm Polybox Bowden tube so you don't get humid air coming in if aren't using a line. The interior dimensions are 6.5 mm. Category: 3D Printer Accessories
These allow for the addition of M3x4Lx5W heat inserts. Mark the belt with a fine tip Sharpie or ballpoint pen and add/remove teeth as needed. Can be used to clamp the end of two belts to cut to length with exactly identical number of…
Question Mark logo knob, 6mm ID for splined potentiometer. 0.20mm layer height, 0.40mm nozzle Brim No Supports In my experience, thermal coefficient of expansion varies between filament types. This is a tight fit that works well for…
This is a thrust bearing for use in other projects. Print instructions: Use PETG, 0.2mmlayer height (was clogging at 0.15mm with 0.6mm nozzle) Supports: off Infill: 60%, gyroid (we want no crossings) Perimeters: 3 Print all items flat…
6mm panel mounting for voron 2.4 350
Guides for rolling dough to 6mm thickness.
180 mm x 150 mm Skimmer Stand Total Height 86 mm (76 mm legs, 10 mm thickness of platform) Honeycomb Pores Round Legs Designed for Reef Breeders RR-150 Skimmer (Reef Rhythms series)
The model is a replica of an original in-molded one (The white one on the picture which belonged to a prism set for bike wheels) So primarily this is for mounting a prism to spokes. A 2mm wide spoke can fit between the legs of the rivet…
Cant find any bit holder in 6mm like mines, so made one. Hope someone like it and find it useful. Thanks!
A rivet that can be popped into a 6mm or 1/4" hole and made more-permanent by pushing a short length of 1.75mm filament into it. A horizontal and vertical orientation has been set up to see which prints best. The horizontal one may be…
Kolebka je protikus k rotoru na výrobu boilies
6mm PPC stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Printing Mine are printed in PETG, they may warp on super hot days, time will tell. ASA or PA6 might be better long term options. The ones on the bike I am fixing are rusted and cheap and ugly. This seemed like a fun project for a boring…
6mm Dasher loading block for 100 cartridges
Corners that helps align the magnetic buildplate on the bed and they're flush with the printing surface. For 6mm bed. Countersink bolts are a must if you want the flush surface. BOM: 6x M3 nuts 6x M3x16mm bolts with countersink head
The 6mm Advanced Rifle Cartridge (6×38mm), or 6mm ARC for short, is a 6 mm (.243) caliber intermediate rifle cartridge introduced by Hornady in 2020, as a low- recoil , high- accuracy long-range cartridge , designed for use in the M16 and…
This is a simple barrel-mounted holder for blowgun nail darts. It clips onto a 16mm diameter tube and holds 8 darts made from 3mm nails . The design keeps the darts secure so they don’t rattle or fall out, while still allowing quick…
6mm PPC Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
A drive shaft (front and rear) for the model GS-racing shadow st-1 RTR
This is just a fancy washer I made for exposed bolt heads. Sorry, I couldn't seem to get a better picture.
Might only be applicable for the Dutch market, but this is a printable version of the ABB HAF cable box insert . The 3mf file has auto generated supports enabled for the object.
Stand for 4 atomizer heads (up to 26mm diameter) My equipment and used settings/material: Printer: Ender 3 v3 Plus (0.4mm nozzle) Walls : 2 Infill: 15% (gyroid) Layer height: 0.2mm Filament: eSun grey PLA+
PTFE lined Lynx Catch3s with TPU and kury 36mm PT versions. Should reduce pump wobble in kury PT Lynxes without breaking quick spring swaps.
Organizer pro nástroje s hex stopkou 6mm
A kiwi peering out from a 16mm plug. Please show me your makes! 🐺
Designed in fusion 360. Handle is 9 inches or 228.6 mm long total. Add text if you want to customize. Please like and upload your makes
The mag-fed Shell has now been modified to take 16mm barrels and in theory should be able to work with blasters like the Wildstyle.
just pull of the old sticks of your e010 (or similar) radio and put on these more comfortable ones. you may have to drill out the holes to make them fit. Print Settings Printer: Turnigy Fabrikator Rafts: No Supports: No Category: R/C…
Remixed to support a door with insulation foam applied to it, total thickness of 6mm
quick remix, added indent for pushpins and 2 extra file slots.
Just print without supports, use bridging. 0.2mm PLA or PETG transparent. Fill it with your GBB 6mm shake and fill your magazine in just a second.
Model to mount a 6mm diameter thermistor such as this one to an aluminium extrusion. One M3x6 SHCS screw + t-nut should be used to attach the mount to the extrusion. The temperature sensor itself should stay in place due to friction. I…
Switch Housing für 16mm Button switch
A simple clip I made for clamping a flat (1.5x6mm) cable to my curtain rod (18mm). I printed mine with PETG and 0.10mm layerheight.
This is a coupler to link mirrotation device to 12mm button. See : The SolidWorks files are given so you can adapt the coupler design to other telesopes. What do you need : 3 x (brackets + base) 15 x Ruthex M3 inserts 3 x magnets (see…
Boquilla para hendiduras del aspirador. Diámetro de la toma 26mm en el interior. Es preferible imprimir en PETG, es más resistente. Llenando el 40%, con un borde.
This work was done as part of a smaller GO Virginia planning effort and also part of a larger Virginia SeaGrant effort to connect innovation with local Virginia aquaculture farms and to explore commercial off-the-shelf technology (COTS).…
porta cortinas hecho en fusion360
Cup holder for my lawn chairs with 26mm tubing Category: Outdoor & Garden
Solution to fit my 49.6mm tamper disc into my 51mm self leveling tamper. Links to the products: Coffee Tamper 41mm 49mm 51mm 53mm 57.5mm 58.35mm Wooden Handle Stainless Steel Delonghi Breville Barista Espresso Accessories - AliExpress…
Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…
Gridfinity socket holder that i made for my neo sockets 29mm-36mm ½ but will probably fit many others as well. Because of the number stands i used 6 outherwalls Simple version here:…
Key cover / holder, 6mm wide and 2mm thick. Osłona / zamocowanie klucza o szerokości 6mm i grubości 2mm
My towel rack broke so you know what had to happen!
A little thicker than the original as well. Category: Toys & Games
Anillo adaptador. Se recomienda imprimir a capa 0.12 de altura en max calidad y sin soportes.
Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…
Simple holder / distances for plywood or similar 3-6mm thick, adds 6mm of space to the honeycomb. I have added 17.5x5.5 magnets at the bottom to fix the object at the desired place. There is also a wider version with 2 magnets at the…
Filament-Cleaner mit PC4-6mm Anschlüssen für 2 Schwämme 20x15x10(15)
This webcam rig holds a webcam above a dicetray. So you can add the webcam to any online game you play with webcams to share your rolling results. With OBS or similar software you're also able to directly include the dicecam video into…
Soldering iron mount for the Minimalistic Heat insert press that can hold a parkside PLS 48 D2 soldering iron or others with 26 mm diameter.
created a top hat grommet for a 16mm pipe / hose to be inserted to make various things and appartises printed in tpu 100%infill outter diameter 19mm inner diameter 16mm flat top disc 26.5mm
This is a drop in barrel replacement for the Dart zone solo pro, that allows the addition of a longer metal barrel and/or the addition of and 16mm OD barrel accessories. Simple, straightforward design that just works. This was made via a…
A hammer bead with a open handle to feel your drawstring while you go to work. 6mm hole. Thanks for the support.
Trommel Perle-Stopper H28mm d6mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Bis max. 6mm Kordel / Schnurstärke. Viel Spas P.S. Dies gibt es auch nochmal mit 14mm Höhe für 4mm Schnur unter:…
