Search results: 6mm

Counting matching models…

PrintablesDarío Bustos

curtain holder - porta cortinas 16mm

porta cortinas hecho en fusion360

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables

Cup Holder for 26mm Lawn Chair Arm

Cup holder for my lawn chairs with 26mm tubing Category: Outdoor & Garden

Order a print of this model

Printables

49.6mm self leveling tamper conversion (sort of)

Solution to fit my 49.6mm tamper disc into my 51mm self leveling tamper. Links to the products: Coffee Tamper 41mm 49mm 51mm 53mm 57.5mm 58.35mm Wooden Handle Stainless Steel Delonghi Breville Barista Espresso Accessories - AliExpress…

Order a print of this model

Printables

Magnetic board game bits trays for 6mm x 3mm magnets

Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…

Order a print of this model

Printables

Colonel Wasp 77 --- Standard 16mm barrel replacement mount (Shell cutting needed)

Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…

Order a print of this model

Printables

Single and Dual 16mm Conduit Wall-Mount Holders

For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…

Order a print of this model

Printables

Bresser Weatherstation adapter on 16mm square steel

I wanted to avoid using batteries to power the station, so I needed a place where I could run the cables through (wires in the picture). Drilling through the supplied mounting rod was not feasible and it is not hollow, so I used a 16mm…

Order a print of this model

Printables

Gridfinity 1/2 socket holder 29-36mm

Gridfinity socket holder that i made for my neo sockets 29mm-36mm ½ but will probably fit many others as well. Because of the number stands i used 6 outherwalls Simple version here:…

Order a print of this model

Printables

6 mm key Attachment / Cover. Osłonka / zamocowanie klucza 6mm

Key cover / holder, 6mm wide and 2mm thick. Osłona / zamocowanie klucza o szerokości 6mm i grubości 2mm

Order a print of this model

Printables

Replacement 16mm Towel Bar Bracket - No Supports

My towel rack broke so you know what had to happen!

Order a print of this model

Printables

Quest 3 AMVR Headstrap clip (for 6mm cable)

A little thicker than the original as well. Category: Toys & Games

Order a print of this model

Printables

ANILLO ADAPTADOR FILTRO 1.25"-36mm

Anillo adaptador. Se recomienda imprimir a capa 0.12 de altura en max calidad y sin soportes.

Order a print of this model

Printables

6mmBit-4mmMicroBit-Adapter

Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…

Order a print of this model

Printables

xTool M1 Plywood Distances 3-6mm

Simple holder / distances for plywood or similar 3-6mm thick, adds 6mm of space to the honeycomb. I have added 17.5x5.5 magnets at the bottom to fix the object at the desired place. There is also a wider version with 2 magnets at the…

Order a print of this model

Printables

Filament Cleaner PC4-6mm

Filament-Cleaner mit PC4-6mm Anschlüssen für 2 Schwämme 20x15x10(15)

Order a print of this model

Printables

Dice Cam (6mm)

This webcam rig holds a webcam above a dicetray. So you can add the webcam to any online game you play with webcams to share your rolling results. With OBS or similar software you're also able to directly include the dicecam video into…

Order a print of this model

Printables

Parkside (26mm) soldering iron mount

Soldering iron mount for the Minimalistic Heat insert press that can hold a parkside PLS 48 D2 soldering iron or others with 26 mm diameter.

Order a print of this model

Printables

top hat grommet for 16mm pipe

created a top hat grommet for a 16mm pipe / hose to be inserted to make various things and appartises printed in tpu 100%infill outter diameter 19mm inner diameter 16mm flat top disc 26.5mm

Order a print of this model

Printables

Dart zone Solo Barrel Options for 16mm OD Barrels that allow barrel accessories

This is a drop in barrel replacement for the Dart zone solo pro, that allows the addition of a longer metal barrel and/or the addition of and 16mm OD barrel accessories. Simple, straightforward design that just works. This was made via a…

Order a print of this model

Printables

Hammer Bead with open handle to feel your drawstring (6mm)

A hammer bead with a open handle to feel your drawstring while you go to work. 6mm hole. Thanks for the support.

Order a print of this model

Printables

Trommel Perle-Stopper / Cord stopper / Kordelstopper H28mm d6mm

Trommel Perle-Stopper H28mm d6mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Bis max. 6mm Kordel / Schnurstärke. Viel Spas P.S. Dies gibt es auch nochmal mit 14mm Höhe für 4mm Schnur unter:…

Order a print of this model

Printables

Punisher Perle / Cord stopper / Kordelstopper 16-3mm / 32-6mm

Punisher Perle / Cord stopper / Kordelstopper 16-3mm / 32-6mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Es sind 2 Varianten Kordelstopper 16-3mm = 16mm hoch max. 3mm Schnur Kordelstopper…

Order a print of this model

Printables

6mm Lynx, Spring Latch, Snap Hinge Modular Ammo Box

This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…

Order a print of this model

Printables

REUPLOAD: 3 and 6mm oarlock spacers

Not my original model. All files and images were created by Thingiverse user Omniverse I just wanted to reupload this file to printables so that I could add it to the boat parts collection on my profile. Be sure to go give the original…

Order a print of this model

Printables

6mm Lynx

These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…

Order a print of this model

Printables

Vacuum cleaner nozzle (inner diameters 32-35-36mm)

Vacuum cleaner nozzle (inner diameters 32-35-36mm) Print settings 0,2mm layer 4 walls no supports use outer brim min 10mm

Order a print of this model

Printables

4mm to 6mm crimping plier jaw adapter

I bought a crimping plier SN-58B and a jaw SN-2549 , but I found SN-2549 width 4mm and SN-58B width 6mm, so I create this 4mm to 6mm jaw adapter.

Order a print of this model

Printables

Shower hook made for 6mm glass door

A shower hook made to be printed on 0.8mm nozzle for a 6mm glass door. The tolerance is quite large at 0.6mm. Mounting space is 7.2mm Should be printed in 0.8 nozzle on a generic or Prusa-printer (2nd image) or 0.4 or larger nozzle on…

Order a print of this model

Printables

paint mixer - add your 1/4 - 6mm shaft

I remade the model so that you dont have to print the shaft, which was bound to be olong and probably not particularly solid. it now has a hole to fit a ¼ inch or 6mm dowel of your choice. I tried it, and it fit perfectly on the first try…

Order a print of this model

Printables

Seilspanner für 6mm Seil (8mm Bohrung)

Einfacher Seilspanner für 6mm Seil. Die 3 Bohrungen haben jeweils einen Durchmesser von 8mm. Ich benutze dafür meistens PETG, 30% Infill mit Gyroid. Einfacher Seilspanner für 6mm Seil. Die 3 Löcher haben jeweils einen Durchmesser von 8mm.…

Order a print of this model

Printables

Tire 21mm D. x 6mm City Motorcycle, Lego 50861

TPU

Order a print of this model

Printables

Counting Trays 100 pcs. - 2mm 2.5mm 3mm 4mm 5mm 6mm 7mm 8mm

Order a print of this model

Printables

Cable Duct 25x15 6mm²

15% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes

Order a print of this model

Printables

LED 16mm star pcb mount

This is a custom 3D-printed holder for standard high-power LEDs mounted on 16mm star PCBs. The mount is designed to securely hold the LED board and allows for easy attachment to various surfaces using m3 screws. No more hassle with gluing…

Order a print of this model

Printables

Wheelchair Controller Handle 6mm Mount Joystick

Wheelchair Controller Handle 6mm Mount Joystick Printed with TPU

Order a print of this model

Printables

Gates Heavy Duty 20 tooth flanged pulley for 6mm belts

Gates Heavy Duty 20 tooth flanged pulley for 6mm belts Heavy Duty version of the common 20 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading

Order a print of this model

Printables

User-Friendly 2.6mm "Zwergstecker" Male Connector

Easy use 2.6mm male connector "Zwergstecker" for Fischertechnik, Märklin, etc. In terms of quality, they don’t quite measure up to the tried-and-true plugs from Fischertechnik or Märklin, but if you don’t have an original on hand, they’re…

Order a print of this model

Printables

Capuchon carré 26mm pour tube profilé

Ce capuchon carré de 26 mm a été conçu pour s’emboîter parfaitement dans des tubes ou profilés carrés de dimensions intérieures similaires. Il permet de protéger les extrémités, d'éviter l’entrée de poussière ou d’humidité, ou simplement…

Order a print of this model

Printables

HSW 6mm socket screwdriver holder

I recommend using @ku7_tech's improved hex inserts https://www.printables.com/model/926144-honeycomb-storage-wall-improved-hex-inserts . This holds a 6mm socket screwdriver with its widest diameter 12mm. I printed two of them to hold it…

Order a print of this model

Printables

Magnetic Soft Jaw Vise Holder for 33mm 36mm Fork Tubes

I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…

Order a print of this model

Printables

76mm (3 inch) Square Nursery Planter Enhanced

🪴 3" Square Planter – Built for Real Growers ***NEW*** Drip Tray: https://www.printables.com/model/1484429-3-planter-tray-smooth-finish-print Don’t let the clean lines fool you — this square planter means business. Designed with…

Order a print of this model

Printables

Push-On Gas Canister Holder for 66mm and table Leg Mount 25mm

Download and 3D print this holder for push-on (clip-on) gas canisters! Securely fixes standard cylindrical 65-66mm canisters in a strictly vertical position on a 25mm diameter camping table leg. Essential for safe operation of push-on gas…

Order a print of this model

Printables

36MM Fork Headlight Bracket

Printing Mine are printed in PETG, they may warp on super hot days, time will tell. ASA or PA6 might be better long term options. The ones on the bike I am fixing are rusted and cheap and ugly. This seemed like a fun project for a boring…

Order a print of this model

Printables

Bowden tube disconnect tool for 4mm and 6mm tubes upgrade

UPGRADE Sometimes it could be hard to grip the shaft on the disconnector. So here is one with a handle..... Ta da! also with a hole so you can hang it up and find where you left it...! some machines have a really tight pneumatic fitting…

Order a print of this model

Printables

V2 Universal - Airtight PTFE Adapter for Elegoo Centauri Carbon (4mm & 6mm)

What's New in Version 2: Standard 4mm Support: Added a second set of files with a 3.8mm hole specifically designed for 4mm OD PTFE tubing, which is the most common size in the 3D printing community. Slot Design: I replaced the closed hole…

Order a print of this model

Printables

Canon RF 16mm and 50mm lens gridfinity bin

I wanted the lens to lay lengthwise so that the model is visible, instead of the end cap.

Order a print of this model

Printables

End cap for 2020 B-type aluminium extrusion (6mm slot)

End cap designed to fit 2020 B-type aluminium profile / extrusion with 6mm slot and 5.5 mm center hole. Added thickness is 1mm., the inside fingers are 5mm, It's a bit fiddly to put on but then it should sit pretty well. If you get a…

Order a print of this model

Printables

FILTER DISPENSER (6mm) spender togo PROTOTYPE

If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl new model, the spring wears out too quickly, i will improve it soon if u have…

Order a print of this model

Printables

Schlauchclip 6mm/ Hoseclip

6mm Dosierschläuche beim Aquarium gedruckt aus PETG. Die Verlängerung damit die Schläuche nicht an der Scheibe liegen.

Order a print of this model

Printables

Cylindrical Glass Container, Protection, Decor, 96mm Diameter

With an area to mark the contents. Holds tight.

Order a print of this model

Printables

Govee H5075 GrowBox/16mm Holder

Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!

Order a print of this model

Printables

Tapo C200 Growtent/16mm Pole Holder (inverted)

On my last run i had it just in a corner shelf, but i had the Problem the cam couldnt be turned enough downwards. After looking around and not finding one that fits how i need it to fit, i designed my own Model. It is intended to be…

Order a print of this model

Printables

Boom arm adapter for digital microscope, 6mm lights.

Just modified cnlmoore's model to fit the lighting on my tomlov 7 inch scope.

Order a print of this model

Printables

MonoBlock v3.12 & v3.15 (6MM & 8MM Axis) for Ultimaker 1, 2, 2+, GO, Connect, Extended

MonoBlock v3.12 (6MM & 8MM) axis This block will not only enable you to convert your standard Ultimaker print head from 2.85mm filament to 1.75mm filament, but will also enable structural integrity and rigidity for higher quality prints.…

Order a print of this model

Printables

16mm Nerf Barrel BCAR and PCAR attachment

THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…

Order a print of this model

Printables

Thrust Bearing (6mm)

This is a thrust bearing for use in other projects. Print instructions: Use PETG, 0.2mmlayer height (was clogging at 0.15mm with 0.6mm nozzle) Supports: off Infill: 60%, gyroid (we want no crossings) Perimeters: 3 Print all items flat…

Order a print of this model

Printables

Metabo KS/KGS Vacuum Adapter with ID 46mm

I made this vacuum adapter for my Metabo KGS 216 to fit the big attachment with 46mm outer diameter of my Makita VC2512l vacuum. Beside this it holds the vacuum hose in place while rotating or cutting. Before it was hardly possible with…

Order a print of this model

Printables

NFC Stickers 36mm Keychain

Had some of these 36mm x 36mm x 0.8mm NFC stickers and needed something to put them in. Prints in three pieces, one outer and two inners, snaps together, add glue for extra security. Files for Wi-Fi, NFC and a blank version ready for…

Order a print of this model

Printables

6mm ARC loading block

The 6mm Advanced Rifle Cartridge (6×38mm), or 6mm ARC for short, is a 6 mm (.243) caliber intermediate rifle cartridge introduced by Hornady in 2020, as a low- recoil , high- accuracy long-range cartridge , designed for use in the M16 and…

Order a print of this model

Printables

Fish skeleton - 6mm + 8mm glass eye compatible

I love little glass eyes and how they make prints pop. I remixed this awesome fish skeleton by adding sockets to the eyes where you can glue 8mm glass eyes. :) Supports will be required. This is not an easy print. I used auto tree…

Order a print of this model

Printables

Red-Eyed Crocodile Skink - 6mm glass eye compatible

I'm a big fan of using glass eyes on my prints. I remixed this adorable skink to be compatible with 6mm glass eyes. It really brings the little fellow to life! Printed with no supports. Happy printing! :) Feeling generous enough to buy me…

Order a print of this model

Printables

Articulated Axolotl - 6mm glass eye compatible

I used negative modifiers to cut out eye sockets so you can place 6mm glass eyes. Just open 3mf file and slice. Holes should appear after sliced. I used painted on supports for the front left and right side of the head. Happy printing :)…

Order a print of this model

Printables

Articulated Axolotl with Articulated Arms and Legs - 6mm glass eye compatible

Order a print of this model

Printables

Articulated Shark - 6mm glass eye compatible

I love glass eyes! They will bring any 3D print to life! Remixed the articulated shark by using negative modifiers to make holes for 6mm glass eyes. I remixed "Shark_v4_A.stl: Original design, movable jaw" and "Shark_v4_C.stl: Original…

Order a print of this model

Printables

Articulated Octopus Keychain - 6mm + 8mm glass eye compatible

Glass eyes on 3D Prints, my favourite! :) Two 3mf files provided. One is for 6mm glass eyes and the other one is for 8mm glass eyes. Files are named accordingly. I personally prefer the 8mm version. Simply slice the file and holes for the…

Order a print of this model

Printables

Air intake 76mm

Dimension 22cm x 12cm x 10,1 cm

Order a print of this model

Printables

Peggit Holder (Craftsman 16mm Ratchet Combo)

Will need the mount from the excellent work here:

Order a print of this model

Printables

Flexi Rex with stronger links - 6mm glass eye compatible

Glass eyes really give this little fella a whole lot more personality! :) I uploaded the 3mf file containing modifiers to allow for 2 x 6mm glass eyes to be inserted. No supports required. Holes for eyes should appear after slicing.…

Order a print of this model

Printables

Simple fun flexi cat - 6mm + 8mm glass eye compatible

The super cute simple fun flexi cat just got a whole lot cuter with my favourite glass eyes! :) Two versions included : 6mm and 8mm glass eye versions. Each size has 2 variations : Keychain and no chain. Files are named accordingly. No…

Order a print of this model

Printables

Nerf Pcar for 16mm od nerf barrel (no supports)

Find an improved and tested version of this model here I modeled this in Onshape but keep in mind, this model has not been tested although i think it should work fine but it probably will reduce FPS a lot because of the FDM layer lines.…

Order a print of this model

Printables

Pokemon Mini Tin Insert 16mm Dice & Small Coins

Pokémon TCG mini tin insert designed to hold 14× 16 mm damage counters or D6's, 5 smaller coins, and 2x status markers

Order a print of this model

Printables

Articulated Armadillo lizard - 6mm glass eye compatible

Glass eyes really bring this little guy to life! 3mf with modifiers uploaded. Holes for 6mm glass eyes will appear after slicing. Don't use a brim. I painted on some supports for the tip of the tail but you can print it without supports…

Order a print of this model

Printables

Cute Articulated Crab - 6mm glass eye compatible

The little cute crab just got a brand new pair of glass eyes :) 3mf with negative modifiers for 6mm glass eyes is uploaded. Holes for eyes should appear after slicing. Update: STL added for simplicity. Happy printing :) Feeling generous…

Order a print of this model

Printables

Articulated lobster - 6mm glass eye compatible

This little sea critter just got a pair of shiny new glass eyes! :) 3mf file provided with negative modifiers for eyes. Holes will appear after slicing. Printed with no supports and no brim. Fixed(non movable) and movable claws versions…

Order a print of this model

Printables

Articulated Catfish - 6mm + 8mm glass eye compatible

Is it a cat? Nope. Is it a fish? Yes, it's a catfish with shiny little glass eyes! :) 2 x 3mf variants provided. One for 6mm glass eyes and one for 8mm glass eyes. Holes for eyes should appear after file is sliced. No supports required,…

Order a print of this model

Printables

Flexi Stegosaurus - 6mm glass eye compatible

The articulated print in place flexi Stegosaurus now compatible with 6mm glass eyes :) 3mf file provided. Simply slice and holes for eyes should appear. No supports or brim required. Update: STL added for simplicity. Happy printing :)…

Order a print of this model

Printables

Articulated Cuttlefish - 6mm + 8mm glass eye compatible

This cute little sea creature just got the cool glass eye treatment! :) Two 3mf variations provided. One for 6mm glass eyes and one for 8mm glass eyes. Files are named accordingly. No brim needed but supports are required. I painted on…

Order a print of this model

Printables

Percussion Frog - 6mm + 8mm glass eye compatible

He had the voice. Now he's got the looks too! :) Two 3mf version uploaded. One is for 6mm glass eyes. The other is for 8mm glass eyes. Files are named accordingly. Both the frog and stick are included in the 3mf file. I printed them…

Order a print of this model

Printables

Articulated Baby Smaug - 6mm glass eye compatible

The adorable baby Smaug now complete with 6mm glass eyes! :) 3mf file provided. Holes for eyes should appear after slicing. I didn't use supports or brim for it. This is the recommended way. Side note: the articulation points in the legs…

Order a print of this model

Printables

Articulated Axolotl - V2.7 - 6mm glass eye compatible (my recommended version)

The super adorable Axolotl just got a cosmetic upgrade! This one is truly gorgeous! :) This is a remix of the high res version of the articulated axolotl. Big shout out to AKinferno for his hard work making this! 3mf provided. Holes for…

Order a print of this model

Printables

Articulated Head Axolotl - 6mm + 8mm glass eye compatible

The most cuteness comes in the smallest packages. This little one just go the glass eye treatment! :) Two versions provided in 3mf form. One is for 6mm glass eyes, the other is for 8mm glass eyes. Files are named accordingly. No supports…

Order a print of this model

Printables

Highland Cow Articulated - 6mm glass eye compatible

The cute little articulated baby highland cow just went up a level in cuteness! :) 3mf file provided, simply slice and holes for eyes should appear in print preview. No supports or brim used. Printed just fine. Happy printing :) Side…

Order a print of this model

Printables

Flexi Pumpkin Dragon - 6mm + 8mm glass eye compatible

This cute little Halloween toy just came to life with a shiny pair of glass eyes! :) Two 3mf files provided. One for 6mm glass eyes and the other for 8mm glass eyes. Files are named accordingly. Holes for eyes should appear in print…

Order a print of this model

Printables

Articulated cute Dolphin - 6mm + 8mm glass eye compatible

This cute little sea mammal just came to life with a brand new pair of shiny glass eyes! :) Two 3mf files provided. One for 6mm glass eyes and the other for 8mm glass eyes. Files are named accordingly. Holes for eyes should appear in…

Order a print of this model

Printables

Cute Articulated Monkey - 6mm + 8mm glass eye compatible

This cute little one just got a pair of shiny new glass eyes! :) Two 3mf files provided. One for 6mm glass eyes and the other for 8mm glass eyes. Files are named accordingly. Holes for eyes should appear in print preview after slicing. No…

Order a print of this model

Printables

Cute Articulated Unicorn - 6mm + 8mm glass eye compatible

The cute Articulated Unicorn just got a new shiny pair of glass eyes! :) Two 3mf files provided. One for 6mm glass eyes and the other for 8mm glass eyes. Files are named accordingly. Holes for eyes should appear in print preview after…

Order a print of this model

Printables

Articulated Forest Dragon - 6mm glass eye compatible

The cute articulated forest dragon just got given the glass eye treatment! :) Two variants provided in 3mf form. One is for keychain and the other isn't. Files are named accordingly. No supports or brim used. Very easy print. UPDATE: STLs…

Order a print of this model

Printables

Axolotl Articulated Keychain - 6mm glass eye compatible

This super cute little one just got treated with a glass eye makeover! :) 3mf file provided for the keychain version. Holes for eyes should appear in print preview after slicing the file. No supports or brims used. Don't worry, the mouth…

Order a print of this model

Printables

Articulated Rhino - 6mm glass eye compatible

This little horned dude just the glass eye treatment! 3mf file provided. Holes for eyes should appear in print preview after file is sliced. No supports or brim required to print. Very easy to print. Side note: Please let me know in the…

Order a print of this model

Printables

Articulated Elephant - 6mm glass eye compatible

This cute little elephant just got the glass eye treatment. :) 3mf file provided. Holes for eyes should appear in print preview after slicing. No supports or brim required to print. Very easy to print. Side note: Please let me know in the…

Order a print of this model

Printables

Narwhal Articulated Keychain - 6mm glass eye compatible

Hey folks! This little sea unicorn just got the treatment it deserves - glass eye treatment! :) 3mf file provided. Holes for eyes should appear in print preview after slicing the file. No supports or brims were used. Very easy to print.…

Order a print of this model

Printables

Articulated Cobra Snake - 6mm glass eye compatible

This little cobra has got his eyes on you! Glass eyes! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim for this one. That would have been a mess to clean up afterwards! I did use…

Order a print of this model

Printables

OXO Grater Base Bowl (76×116mm) – Remix

This is a grater base bowl designed specifically for OXO brand graters with a 76 × 116 mm base . I originally liked the All-in-One Grater Base Bowl by Chopper Originals , but the sizing didn’t match my grater. Instead of forcing it, I…

Order a print of this model

Printables

Flexi snake - 6mm glass eye compatible

This cute little happy flexi snake just got a glass eye makeover! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. Printed without supports or brim. Easy one to print. Update: STL added for simplicity.…

Order a print of this model

Printables

Rattlesnake v2.2 - 6mm glass eye compatible

I just found a new home for some 6mm glass eyes. In the head of this rattlesnake! :) 3mf file provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim on this one. The file does come with built in…

Order a print of this model

Printables

Triceratops - 6mm glass eye compatible

Finally! A Dino! Who doesn't love dinos? I absolute adore them! This little fella just got the glass eye treatment! :) 3mf file provided. Holes for eyes should appear after file is sliced. No supports or brims were used. Pretty easy one…

Order a print of this model

Printables

Cute cobra snake - 6mm + 8mm glass eye compatible

This little slithering cutie just got the glass eye treatment! :) 2 variations provided in the form of 3mf files. One uses 6mm glass eyes and can be used as a keychain. The other one isn't a keychain and uses 8mm glass eyes and is also a…

Order a print of this model

Printables

DIY Simhub belt tensioner design for weaker 56mm motors

I tried other designs for DIY Simhub belt tensioner but the 56mm motors were skipping steps. The cylinder has a diameter of 70mm which is significantly lower than all other designs 1x round magnet 15x3 3x m5 20mm or 25mm 1x m5 30mm or…

Order a print of this model

Printables

Headlamp Hanger 26mm Strap Coast

Headlamp hanger for units with head strap width of 26mm or under. Sized for attaching with two small command strips or two screws 40mm apart. Pictured in use with Coast headlamps. Print as pictured. No supports needed.

Order a print of this model

Printables

Gorilla Gogo - 6mm glass eyes compatible

The cute gorilla gogo got some nice new glass eyes. :) 3mf provided. Holes for eyes should appear in print preview after slicing. I didn't use a brim but supports are required. I used auto tree supports with my overhang threshold set to…

Order a print of this model