Swyft slide REV motor adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts needed to use REV motors with the Swyft Robotics slide kits.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
We wanted to use Swyft Robotics new slide kits but didn't want to spend an arm and a leg on GoBilda motors and gearboxes, so we designed these parts!
These parts are made to work with REVs REV-41-1211 motors. We may end up altering these parts to work with REVs planetary cartridges. We made them work with REV-41-1211 since those were the only gearboxes we had on hand.
The “Coupler” is designed to be used with M3 threaded inserts, they're supposed to go into the four larger holes on top (NOT the through holes). Make sure you print the part with at least 4 walls and 20% infill.
The "Bracket" is not supposed to be 3D printed. It's there if you have access to a lasercutter or CNC. If you do decide to print it and you have trouble getting bolts through the holes, that's because they're designed with CNC/lasercutter tolerances in mind.
Make sure to print the “Adapter” as strong as reasonably possible to make sure it doesn't snap. The oval shaped hole is meant to line up with the setscrews. Make sure it's aligned properly, the setscrews are meant to contact the motor axle and not the print itself.
Links:
- https://zappp.tech
- https://www.revrobotics.com/REV-41-1211/
- https://swyftrobotics.com/products/swyft-slide-ftc-elevator-kit