Fellow Stagg EKG Shelf with scale ejector and Melodrip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf lift for your Stagg EKG kettle with optional melodrip holder and sliding scale ejector to help get your scale out.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another Stagg EKG Kettle elevator to offer space to put your scale under. I had trouble getting my lovely little Normcore scale out from under the original model so I added this optional sliding bar.
To use scale ejector: You need to grab it on both sides from the handles that stick out and slide it forward to push the scale out. It should slide smoothly enough that putting the scale back in should automatically reset it's position. Warning: Do not use scale ejector while kettle is hot - risk of touching the kettle and thermal injury to yourself is too high.
I also felt the original shelf was a little wobbly so I added an optional transverse rear support beam and added an option to hold a stir bar and a melodrip since I had no good place to put these.
Also added some imprints on the shelf so it's obvious where the legs fit and the imprints allow for a better glue surface.
Cute pug and crossbones logos are optional in 3mf file - replace with your own design if you prefer.
In fact everything is quite customizable in the attached 3mf files.
Note that the printables previews do not properly render negative volumes - files should look a bit different in your slicer.