Prusa Handle Passthrough Grommet for PTFE Tubes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Passthrough grommet for Original Prusa Enclosure top handle for PTFE tubing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've been playing with the EMMS system compiled by Clamikra but didn't want to drill a hole in the top of my Original Prusa Enclosure with hinged lid. Instead, I used a ¼" drill bit (6.35mm if that's a thing in the rest of the world) to drill a hole in the Prusa Enclosure handle, and ran my tubing through that.
Full disclosure, I've moved the unit internally again for troubleshooting, I had friction issues with the MMU3's tubes in the rear.
Two files, one basic one, and one with a small bevel as I was playing in Blender.