1 / 2
Prusa Handle Passthrough Grommet for PTFE Tubes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Passthrough grommet for Original Prusa Enclosure top handle for PTFE tubing.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I've been playing with the EMMS system compiled by Clamikra but didn't want to drill a hole in the top of my Original Prusa Enclosure with hinged lid. Instead, I used a ¼" drill bit (6.35mm if that's a thing in the rest of the world) to drill a hole in the Prusa Enclosure handle, and ran my tubing through that.
Full disclosure, I've moved the unit internally again for troubleshooting, I had friction issues with the MMU3's tubes in the rear.
Two files, one basic one, and one with a small bevel as I was playing in Blender.