Sunlu filament FC01 joiner guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This platforn helps to keep curled filament stable and aligned when using the Sunlu Filament Splicer / Joiner.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 219
- Wydruki
- 0
- Wyświetlenia
- 1744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
The Sunlu Filament FC01 joiner, is an excellent product, but doesn't suport curled or spring like filament that will not stay flat. So this jig, helps to align and keep the filament straight, so that a perfect join can be obtained every use.
Use double sided tape to stick down the sunlu unit onto the base unit as shown in the photo, and ensure you align ther filament as you do.
use 8 x 6mm by 6mm cylinder magnets, press fitted into the holes to hold the filament at the sides.
follow the instructions Sunlu states and you should get perfect joins every time.
Good luck and happy printing with all those short bits of filamnet.