Power Strip Hanger for TrippLite TLM626
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project involved redesign of a coworker's original hanger prototype to accept TrippLite TLM626 power strips.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This project involved redesign of a coworker's original hanger prototype to accept TrippLite TLM626 power strips. These were also designed to mount on a 1" thick desktop surface with enough room for thick dual-stick tape (Gorilla tape or similar). There are two versions included here, one for the main supply power cable of the power strip from the left (version 1) and from the right (version 2). For either version you should print 2x hangers.
Recommended print settings (at least what I have been printing):
- Material - Paramount PETG
- Walls - 4-6
- Infill - 35%
- Nozzle - 0.4mm
- Printer - BambuLab X1C & P1S