1 / 2
Power Strip Hanger for TrippLite TLM626 — image 1
1 / 2

Power Strip Hanger for TrippLite TLM626

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This project involved redesign of a coworker's original hanger prototype to accept TrippLite TLM626 power strips.

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
77
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution

This project involved redesign of a coworker's original hanger prototype to accept TrippLite TLM626 power strips.  These were also designed to mount on a 1" thick desktop surface with enough room for thick dual-stick tape (Gorilla tape or similar).  There are two versions included here, one for the main supply power cable of the power strip from the left (version 1) and from the right (version 2).  For either version you should print 2x hangers.

Recommended print settings (at least what I have been printing):

  • Material - Paramount PETG
  • Walls - 4-6
  • Infill - 35%
  • Nozzle - 0.4mm
  • Printer - BambuLab X1C & P1S