Honda Fob Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Honda fob cover, saw many covers but none had a hole on to back to access the slider to be able to remove key.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Honda fob cover, saw many covers but none had a hole on to back to access the slider to be able to remove key.
This should work for the other models of Honda keys that have this shape. Mine does not have the HOLD button on the bottom to honk to find your car but left space for those models that have them.
I have added the fusion 360 file if you wish to print in own wall thinness, it is a parameter called “WallThickness”.
There is also 3mf with wall thicknesses in 0.8mm(shown in pictures), 1.2mm, and 1.6mm if you just need a file to print.
My proof of concept is printed in PLA, but I will reprint in ABS think is a better material or PETG.
I did use supports added picture.
Normal support, everywhere