1 / 1
Drybox To Fit Polydryer - bottom gasket (gasket-A-plugbox) — zdjęcie 1

Drybox To Fit Polydryer - bottom gasket (gasket-A-plugbox)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All other gaskets were a perfect fit, except this gasket.

Ocena
5 / 5
Polubienia
35
Pobrania
122
Wydruki
2
Wyświetlenia
1126
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print using TPU with well calibrated printer, and dry filament. 
Match the chamfer position when fitting to the bottom plug and measure it afterwards. 
It should be 28,3-28,4mm on the shorter side.

The f3d file is Fusion360 parametric, alternatively use one of the generated sizes. For my dry tpu 28.30mm fits best, but if it's even a little wet 28.20 or 28.10 are better.

Tagi