1 / 3
TS100 stand with extra large cup for brass wool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original by vtrman does not have a big enough holder for the brass wool. This one will fit most dish scrubbers…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original by vtrman does not have a big enough holder for the brass wool.
This one will fit most dish scrubbers too.
Added a small hole next to where the iron sits for the allen key.
You will need
- one inch washer x1
- one and a half inch washer x1
- sand/pea gravel/dirt/cat litter (something to fill the model to add weight)
- Brass/copper wool. You can buy if for soldering but might be cheaper to get one for scrubbing dishes.
Possibly rubber stick on feet to keep it from sliding. Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Doesn't Matter
Supports:
Yes
0.3mm
Infill:
20
Category: DIY