AM4 vertical mount for Cooler Master Hyper T4 & Hyper 212
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It bothered me that The only orientation I could mount my Hyper T4 on my new Ryzen CPU was with a horizontal fin-…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
It bothered me that The only orientation I could mount my Hyper T4 on my new Ryzen CPU was with a horizontal fin-stack. So I designed this reinforced bracket to allow you to mount many Cooler Master CPU air coolers with the fin-stack vertically and have your front to back air flow.
Might also work with other single tower coolers. Let me know if it does and I'll add it to the list.
I do recommend using a material stronger than PLA, such as PETG or Carbon Fibre. Also use lots of infill for more strength. Don't leave anything to chance with your expensive CPU.
It is contoured to miss the capacitors around my CPU socket, but if your motherboard is different let me know. I am using the MSI B450 A-MAX-PRO
Update: Modded the design a little because users are complaining, eventhough no change will actually affect the strength. Just print it with really thick walls, 4 mm or more.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Yes
Resolution:
0.2
100%
Filament: Generic PETG or Carbon Fibre
Notes:
I measured and it also works for Antec, Thermaltake, Rosewill, PCCooler, and UpHere tower coolers.
Category: Computer