Liczymy pasujące modele…
This is a custom cover to replace the AIO cover of the CoolerMaster Master Liquid ML360R. This was my first print of the model so the infill wasn't set properly. Probably higher infill will prevent the light from bleeding through the print.
This mounting system for the Coolermaster Qube 500 enables secure attachment to the side panel of a desk. Once the brackets are fixed to the desk structure, the case can be frontally extracted without the need for tools, allowing for easy…
This is the gommet for a coolermaster CM 690 tooless harddrive bay. It might fit into other coolermaster cases. It's designed to be printed in TPU for better vibration isolation.
Simple adapter to fit 92mm fan on top of Coolermaster Atmos's pump. Why? Because i wasn't happy with my SSD and RAM temps, that's why. Highly effective, and with slim fan it also fits nicely in A4-H2O case. I printed mine from Transparent…
Modifications: Added spaces for 6x3 Round Magnets and some holes for cable passthrough Magnetic PSU Cover for Cooler Master Q300L/Q300LV2 with holes for cable passthrough Needs 12 6x3 Round Magnets and possibly some glue
Its the coolermaster masterbox lite 5 trims for the top and bottom its really that simple you might want to print them in PETG so it doesnt melt from the computer's heat
turn your coolermaster aio into an aircooler! PRINT WITH SUPPORTS
an reaching hand coming out of your aio! PRINT WITH SUPPORTS (tree recommend)
Please send a foto if you printed this out and set a rating of the model
Yet another HDD Mount for the NR200. This version allows you to have both a top slim fan and a full length GPU. this one also has extra space between the model and the adapter to allow better air flow. I've used Noctua's a12x15 as a top…
This is a custom cover to replace the AIO cover of the CoolerMaster Master Liquid ML360R. This was my first print of the model so the infill wasn't set properly. Probably higher infill will prevent the light from bleeding through the print.
A bracket for mounting HP EliteDesk 800 G3 power supply inside CoolerMaster NR200/NR200P case. I don't know if this is the best placement for the PSU but I wanted to get it done as quick as possible so I took 2 models and remixed them.…
A bracket for HP EliteDesk 800 G3 SFF motherboard for mounting in Cooler Master NR200 NR200P cases. It's likely you can also use it for mounting inside other mATX and ATX cases but I have not tried it myself. This is a low effort model,…
Backplate to be used with my motherboard offset plate. I recommended printing it with some higher temp resistant filament like PETG. I've used orange Prusament PETG. I personally have RX6400 GPU so there is an additional cutout for…
This mounting system for the Coolermaster Qube 500 enables secure attachment to the side panel of a desk. Once the brackets are fixed to the desk structure, the case can be frontally extracted without the need for tools, allowing for easy…
Raised feet for my Coolermaster HAF 922 PC case. The need for raised feet arose after I installed a cooling fan on the inside bottom of the PC case. The stock feet provided very little airflow especially when the case is placed on carpet.…
You can attatch a 120mm fan to the front side of the pump. If you are using FormD T1 and 120x15mm fan, GPU slot configuration has to be less or equal than 2.5-slot. You have to remove transparent cover and silvery second cover (you can…
Stock feet are super fragile and I needed more clearance from the carpet. Tried my best in TinkerCAD. Printed in TPU.
Brackets to mount your PC to your desk I wanted a visually cleaner workspace so I wanted to mount my PC to the underside of my standing desk (before it was sitting on top) This is specifically for the CoolerMaster NR200 case (when laid on…
I drew this model from an original bracket that came with the Cooler Master PC case. Other models that I found online were too long and did not fit into my case. The bracket works for the left and right side. PLA may become soft or deform…
So I decided to transplant my old loop with an EKWB A240G aluminium loop into an NR200p. Seeing how it is recommended to have a EK-XRES 100 SPC-60 MX PWM (incl. pump) in the vertical orientation (according to the manual). I decided to…
I made this as i was unsatisfied with other existing slim fan tool less pins that were already uploaded. 4.10mm may be tight on some fans, its a tight fit for the UPSIREN fans i had. was not able to try others i have made a 4.00mm version…
This final version was printed with Sunlu PLA+. I suggest organic supports with a max branch angle of 20 degrees to keep the supports just at the overhang of the mounting pins, otherwise it will print supports all the way down to the…
My first entry for the Cooler Master: FreeForm Playground contest. I wanted to design a mounting system that would be a bit stronger and more secure by integrating an M4 screw into the design. The back piece fits through 2x holes and has…
Turn your battlestation into a portable workstation (kind of) by attaching your monitor directly to your Coolermaster Qube case! This design has two different vesa mounts for monitors to attach using my Coolermaster Qube M4 Bolt Mounting…
To je sprdnji pokrov za coolermaster 600 z izboljšanim pretokom zraka. Ustvaril sem ga z inspiracijo iz avtomobilskega sveta. Ustvaril pa sem jo tudi z razlogom da vem kako je to ko je računalnik preobremenjen in se ne more ohladiti zato…
Vesa Mount for CoolerMaster QUBE540 Case Hang your Monitor directly to your Case.
Front panle cover for CoolerMaster Qube 540 , designed with heaving in miond to hace easy acces to usb, usb-c, power button and headphone jack. Designed to print in 0,2 mm layer, material doesnt matter, but if u have trouble with…
As the short description says this if for the competition. to put these in your coolermaster just push them in from the back in your case. If you have any improvements please tell me! Printing: Print these in the highest quality…
Contest model for CoolerMaster challenge Whole design is “artistic” and “abstract”. I was going for Gustav Klimt's symmetry and Giuseppe Arcimboldo's idea of the whole world - please do not judge I was bored and think this is an…
This is a simple plug print to fit the honeycomb spaces of the Cooler Master MasterFrame 600 panels. They are designed for TPU and intended to just make the panels more colorful or create interesting patterns. The pictures are shown( 100%…
A handy phone holder that can be screwed into your Cooler Master with ease.
Recycle that heat from your extra FPS and FLOPS! Why let all that precious CPU and GPU heat go to waste? This printable duct and spool mount turn your PC case into a mini filament dryer — no extra electronics, no power draw, just pure…
A two part shelf for a cat so that air flow isn't impeded. (Or a shelf for random stuff). It comes in two pieces that can be printed on smaller printers with 180*180 beds.
This is my first entry for the Cooler Master FreeForm Playground Contest, and several additional designs are already in development. The models are fully custom-designed for the MasterFrame 600, a highly modular case specifically intended…
Cover have 2 versions. One of them with hooks to attach it to the bottom edge of the PSU bracket. Even if you don't like this solution- just break off the hooks.
This is my second entry for the Cooler Master FreeForm Playground Contest, and several additional designs are already in development. The models are fully custom-designed for the MasterFrame 600, a highly modular chassis built to…
This is A Computercase for the Coolermaster Cube 540 in the style of the Prusa Core one 3d-Printer.
This should be a set of grills for the entire Coolermaster range featuring the Coolermaster logo. Variations in angled and small versions. For Atmos II 240 and 360 and for 80mm, 120mm and 140mm standard designs. Parameteric Fusion 360…
Wind Tunnel This is another custom front-panel design for the MasterFrame 600 for the CoolerMaster FreeForm Competition. The model is based on the wind-tunnel principle used in the HAVN 360 case. The goal is a straight, unobstructed…
Pac-Man Front & Abbey Road Top – Two New Designs for the MasterFrame 600 I’ve created two more custom parts for the Cooler Master MasterFrame 600. Both follow a classic arcade theme and are simple to print and install. Pac-Man Front The…
HDD tray for a COOLERMASTER HAF 932 computer case cracked, so modelled up a replacement. I printed in PETG on a P1S, using tree supports. Uses a piece of D1.75mm filament cut to a length of 20mm as a hinge.
This is the gommet for a coolermaster CM 690 tooless harddrive bay. It might fit into other coolermaster cases. It's designed to be printed in TPU for better vibration isolation.
Simple adapter to fit 92mm fan on top of Coolermaster Atmos's pump. Why? Because i wasn't happy with my SSD and RAM temps, that's why. Highly effective, and with slim fan it also fits nicely in A4-H2O case. I printed mine from Transparent…
Modifications: Added spaces for 6x3 Round Magnets and some holes for cable passthrough Magnetic PSU Cover for Cooler Master Q300L/Q300LV2 with holes for cable passthrough Needs 12 6x3 Round Magnets and possibly some glue
Its the coolermaster masterbox lite 5 trims for the top and bottom its really that simple you might want to print them in PETG so it doesnt melt from the computer's heat
Overview Cover for the Coolermaster AIO combining black 3d printed parts and laser cutted wood Components The design consists of three 3D-printed parts: Wood Inlay - wooden cover element made from 1mm wood Plastic Inlay -plastic cover…
turn your coolermaster aio into an aircooler! PRINT WITH SUPPORTS
an reaching hand coming out of your aio! PRINT WITH SUPPORTS (tree recommend)
This is a collection of parts for adding RGB underglow lighting to the Notepal U2 Laptop Stand by CoolerMaster. Lighting is added to the left and right-hand sides of the stand, making it visible even when a laptop is resting on top. It…
Please send a foto if you printed this out and set a rating of the model
Here we have a cover for a coolermaster AIO with my brothers Character design named Fluffy.
Custom dripping-style figure shelf made for the Cooler Master Q540. Designed to mount cleanly outside the case for displaying figures, collectibles, or small accessories while keeping the build looking sleek and unique.
This is a remix of the remix for the the Snapfit NR200 PCIe Slot Covers, designed to snap onto the back of the case where the vertical GPU support is located. it is based on the reinforce model to be more sturdy the vents are angled to…
GameQube – Cooler Master QUBE 500 Mod Inspired by the newly released "GabeCube" build, the spare parts I had lying around, and my magnificent plasma TV, I present the GameQube ! A set of decorative panels that transform the Cooler Master…
My original mounting bracket broke when torqueing the mounting screws the first time. This model is a replacement that held together when torqued. Print four of the mounting clips as you need one for each screw. I recommend printing with…
This is an SSD/HDD tray for the CoolerMaster HAF X 945 case in 2 versions. Version 1: rynna_na_hdd_102mm: This is the normal tray, with SATA and power connections oriented from the back, like in original HAF trays. Version 2:…
This is a bracket to allow native installation of a Coolermaster Riser Cable PCIe 4.0 16x 300mm in a Fractal Design Meshify 2 XL (non XL should also work). The bracket screws into the cage over the PSU as the native Fractal Design riser…
Remixed from OGkush standoffs, kept having issues trying to use them myself. print sideways so holes for nuts are facing up. Changes From Original: use 2x square M3 nuts per stand-off, one for the backplate screws, the other holds cooler…
Print with 0.1mm with the flat side on the sheet, might be some junk in the middle cross, should be easily removable with an allen key or knife. Tested on Coolermaster SK650 Cherry mx red Should work on other keyboards using cherry mx…
An Ender 3 sized CoolerMaster Masterbox Pro 5 RGB PSU cover. This has been shortened slightly to fit the 220mm print size of my Ender 3, and has a slightly modified design to make it more 'printer friendly'. I printed this with a little…
This fan shroud was created to redirect air into the radiator of vertically mounted GPUs in the Cooler Master NR200(P) case. Created to fit any 120mm fan. Baseplate can be shrinked for added clearance. Countersunk screw holes created to…
because this pc case feets are very low i designed some extended feet for more air for the bottom fan. they fit perfectly
anti-sag for suprime rtx 3080 ti and coolermaster prismatic fan. i might be a snug fit, you can mod if you want to use tre support
With this mount the 11.9 inch LCD from Waveshare can be mounted vertically within a CoolerMaster HAF 700 evo case right besides the mainboard in the often unused mounting holes for bigger SSI-EEB motherboards. There are 3 standoffs and…
This simple mount for the Waveshare 11.9" display can be attached on the fan brackets of the CoolerMaster HAF 700 evo pc case. It makes use of the typical 140 and 120mm fan mounting hole dimensions and can be easily attached even with…
anti-sag for suprime RTX 3080 ti and Coolermaster prismatic fan. I might be a snug fit, you can mod if you want to use tree support this version just has a little support so it doesn't get into the fan
Con esta pieza se pueden sustituir las chapas extraíbles de los puertos PCI y aprovechar ese hueco para colocar un ventilador, ya sea para extraer el aire caliente de la GPU o meter aire fresco. Ahora mismo el modelo está hecho para un…
a solution for your usb 2.0 storage if you own this case
LEGO compatible accessories for the Coolermaster Qube You can use my stud tolerance gauge to test your desired fit and download the appropriate STL file. Check out my other entry to the Coolermaster Qube Design Contest aswell If you need…
Galton Board inspired Catching game for CoolerMaster Qube500 sidepanel This is a mod for the CoolerMaster Qube500 Computer case to put a galton-board inspired catching game on the sidepanel. Printing All parts that contain connectors for…
Rocket ball maze: avoid the holes This is a rope pulling game designed for the sidepanel of the CoolerMaster Qube500, where you have to fly your rocket from earth to the moon while avoiding the stars and dropping your ball into the…
yet another set of Letters, Numbers and Symbols for the Coolermaster Qube Check out my other entry to the Coolermaster Qube Design Contest aswell If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly…
This adapter lets you mount a Safariland QLS Receiver Plate to the Coolermaster Qube so you can attach a Holster with QLS Fork. i used this model in the rendered assembly for demonstration purposes If you need anything, feel free to reach…
A list of storage solutions to attach to the QUBE 500 case. I plan on adding some more as most of the models I am using for this are models I already made as practice for my collages CAD program Current list: Caliper Holder…
Enhance your experience with these versatile feet that not only uphold your case but also offer additional functionalities using the same patterns as the Coolermaster QUBE 500 pattern. These sturdy supports not only keep your case upright…
Simple, easy to print Tetris pieces made to fit the Cooler Master QUBE 500 to give a cool retro vibe
Combined the Honeycomb system with the Evo Badge
My entry into the Cooler Master Atmos Pump cover contest! I saw the shape and immediately thought robot eye. It looks cool and allows light to shine through the opening in the center around the logo which becomes the “pupil” in this…
This is my ATMOS mod for comunity. Model should deliver RGB light effects too. There are two models for different hose position. You can add TEXT on tag at PrusaSlicer. Example from pictures is printed with 0.2mm layer height. !!!PLEASE…
DOLBY ATMOS for Cooler Master, easy to print without supports
It's a shell for a Pimoroni 2.1 round screen controlled by a Raspberry Pi Zero W that lives just behind it. It will show AIDA64 data on the screen and doesn't rely on the PC for display input, only the Pi.
Hide the cables on the left, right and under the PSU. Simply apply some VHB adhesive tape to the back in the area without holes (bottom) and stick it on. Quickly attached - quickly removed again. Tested with an RTX 3090 (approx. 3mm gap…
Yet another HDD Mount for the NR200. This version allows you to have both a top slim fan and a full length GPU. this one also has extra space between the model and the adapter to allow better air flow. I've used Noctua's a12x15 as a top…
This is a simple click-on replacement foot I designed for my Coolermaster Elite 311 PC case after the original one broke.
Simple version of MM720 mouse wheel (because mine broke off the "tip", the crank that fits the encoder). This version does not account for the LED on the top. For now, I just tucked it away below the middle part of the chassis. May…
“Realistic” version of MM720 mouse wheel (because mine broke off the "tip", the crank that fits the encoder). V2 is hollowed out, with thin “fins” located on the edge of one of the sides, connecting to the center. This is closer to the…
Remixed so it fits the Cooler Master Riser cable PCIe 4.0 x16
I've just created a small adapter to use M8x20mm furniture casters at a Coolermaster HAF932 PC Case. My original rolls are broken so now this is the sparepart :) you can use the four standard threads. Dont be scared of the haires at the…
Fan mount adapter to replace a CoolerMaster 92mm fan that has 80mm hole spacing, with a normal 92mm fan. Designed for CM FA09025H12LPB. This fan is found on a variety of both OEM and off-the-shelf CoolerMaster coolers, and popular with…
