CoolerMaster PSU Cover/Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Ender 3 sized CoolerMaster Masterbox Pro 5 RGB PSU cover. This has been shortened slightly to fit the 220mm print…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
An Ender 3 sized CoolerMaster Masterbox Pro 5 RGB PSU cover.
This has been shortened slightly to fit the 220mm print size of my Ender 3, and has a slightly modified design to make it more 'printer friendly'. I printed this with a little cutout for a display and it fit perfectly, albeit a little tighter than the original.
I drilled out the hole for the retaining screw at the back of the case, but you could also use a heat set insert or leave it be - the fit is good enough that it shouldn't wiggle free even without the screw.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
15%
Category: Computer