Galtoni Catching Game for CoolerMaster Qube500
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Galton-Board inspired catching game for the side panel of the CoolerMaster Qube500.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Galton Board inspired Catching game for CoolerMaster Qube500 sidepanel
This is a mod for the CoolerMaster Qube500 Computer case to put a galton-board inspired catching game on the sidepanel.
Printing
All parts that contain connectors for the holes in the sidepanel should be printed with those facing up. The Bucket is best printed standing up with supports for the rail interface. Depending on your printer you might want to put a support blocker into the holes in the front.
All parts are provided as .stl files and most also as .stp files. If your slicer can handle .stp files, I reccomend using these as it more accurately represents the cyilnders in the pins (your printer can use arcing gcode commands G2/G3 when you use these).
For users of BambuStudio, a fully assembled printing plate is also provided, with by-object settings for supports on the buckets and balls.
Parts you need to print:
- 011_SingleGaltonPin: As many as you need for your board setup (in the photo there are 45)
- 012_CenteringPin: Left and right variations (one each)
- 013_CatcherRail: One (use the largest version that fits on your print bed diagonally, OHD = Outer-hole-center-distance)
- V01: 280mm OHD (fits on BambuLab X1C/P1S/P1P [256mm^2 bed])
- V02: 240mm OHD (fits on Ender 3 and similar [220mm^2 bed])
- V03: 200mm OHD (fits on Prusa Mini/BBL A1 [180mm^2 bed])
- 014_CatcherBucket: One
- 015_Ball: As many as you want (I reccomend ~5). You can also replace these with similarly sized balls of a different material (⌀14.4mm). Heavier balls are probably better for the game.
Assembly
- Start by fixing the centering pins at the top center of your board. There should be a full hole of space between the two pins.
- Place the first galton pin directly underneath the center of the two centering pins, while leaving one row free.
- place further galton pins to the left and right of the first one, always leaving a hole of space inbetween.
- Leave another row free underneath this row and place pins for the next row underneath the free spots of the upper row.
- Repeat step 4 until you have only two free rows of holes at the bottom.
- Place the Catcher-Rail in the lowest free row.
- Place the Catcher-Bucket in the slot of the catcher-rail
- Have fun!