Coolermaster Qube Vesa Monitor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two different vesa mount design for the Coolermaster Qube. Perfect for LAN parties, just attach your monitor to your PC!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn your battlestation into a portable workstation (kind of) by attaching your monitor directly to your Coolermaster Qube case! This design has two different vesa mounts for monitors to attach using my Coolermaster Qube M4 Bolt Mounting Bracket design. The original brackets provided by Coolermaster were rated at 2 kg, but by adding an M4 bolt to the mounting brackets and distributing the weight of the monitor over 3 different attachment points this system should hold most lightweight monitors.
The FlushMount version places your monitor as close to the case as possible and does not allow for adjustment after mounting, but the PivotMount version allows the monitor to pivot up and down to achieve optimal viewing angles (so long as you are directly in front of your case/monitor).
See the included Assembly Directions PDF for full details and instructions.
--------------------------------------------------------------------------------------------------------------------------------
For both options you will need:
- 3x printed M4ScrewMount_Back_V1 parts
- 3x M4x12 screws
- 3x M4 nuts
For the FlushMount design you will also need:
- A printed Vesa_FlushMount_M4ScrewMount
For the PivotMount design you will also need:
- A printed Vesa_PivotMount_Bracket_M4ScrewMount part
- A printed Vesa_PivotMount_M4ScrewMount part
- A M4x30 screw
- An additional M4 nut
--------------------------------------------------------------------------------------------------------------------------------
Fit testing has been conducted with a 3D printed Qube faceplate from the official stl provided by Coolermaster. Strength testing has not been completed at this time, but the design should accommodate lightweight monitors.
This work is distributed under a CC-BY-NC-SA license. No commercial use or derivatives are allowed. For commercial licensing please contact the designer.