HP EliteDesk 800 G3 SFF PSU bracket for CoolerMaster NR200 NR200P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for mounting HP EliteDesk 800 PSU in NR200/NR200P case
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bracket for mounting HP EliteDesk 800 G3 power supply inside CoolerMaster NR200/NR200P case. I don't know if this is the best placement for the PSU but I wanted to get it done as quick as possible so I took 2 models and remixed them.
It's possibly compatible with G1 and G2, at least according to the description of the ATX adapter plate. I left original screw holes if that's the case.
I recommended printing it with some higher temp resistant filament like PETG. I've used orange Prusament PETG.
Full story and pictures how I case swapped HP EliteDesk 800 G3 SFF to CoolerMaster NR200 is available here: https://imgur.com/a/K1ND7oh