CoolerMaster CK550 keyboard leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CoolerMaster CK550 keyboard leg replacement
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Found this CoolerMaster CK550 keyboard with a broken switch on space key and a missing leg. Replaced the switch by cannibalizing the SCRLK key and then designed the leg based on the one available.
Printed in this orientation, the leg seems to have good grip to the table but i added these gaps on the bottom in case I want to put a material that can perform better such as specific tapes or silicone.
Printed with PETG filament using 0.4mm nozzle and works fine. Be mindful that in order for the leg to snap inside the position, some force should be applied and for that reason PLA may not be appropriate.
Update 20/10/2026: Uploaded the model without the gaps.