Elegant Dancing Tap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Took the Elegant Dancing silouhette and used it as a Tap for the Keezer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
@Miloske model was beautiful just feels great in the hand had to use it as a Beer Tap handle.
I'm also sharing how i did this. It might inspire others.
Quite an easy remake, here are the modification:
- Cut a portion of the lower model to reduce the base width
- Added a 1 inch Screw hole at the bottom to screw the Beer Tap
- Screw size is regular 3/8
There was so many triangles in the STL, it permit me to figure a way to work without transforming to F360 Native. I test the opposit…
1- Imported the STL from Miloske and fit to size
2- Split the mesh removing 1 inch from bottom.
3- Designed the screw part in F360 and save as Mesh and negative merge with the STL
Export and Slice.
In the slicer, i slow the speed and add a brim to solodify the adherence to the build plate. This help me prevent model vibration at the top delicate part. The model is a about 9 inch tall.
Hope this help, I can now easily modify Mesh.