60mm (2.5") screwdriver bit holder box v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit holder box that is designed to hold 10 standard 2.5 inch 60mm long screwdriver bits.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bit holder box that is designed to hold 10 standard 2.5 inch 60mm long screwdriver bits.
Lid closes with two indents and can be opened by pulling. The bits are loose fit inside the holder. A lanyard hole is provided for portability.
I recommend printing the lid of PETG for some flex and the base can be printed out of anything.
Also available for 160mm bits and holds 32.
Update 2025-01-31: Added grooves on the side of the lid for better grip. Also reduced the bottom thickness of the lid & base. New version is compatible with the old, old one remains available in the project.