IKEA FEJKA mounts for IKEA SKÅDIS containers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang plants onto your IKEA SKÅDIS pegboard.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I wanted to decorate my office with some IKEA FEJKA plants, and hang them onto the IKEA SKÅDIS pegboard. These plants come with a fixed round plant pot, which does not easily fit into the rectangular SKÅDIS containers.
This print consists of two parts: the first part is the base insert, that goes into the container. The second are plant-specifc inserts (20x20mm) that go into the base. I bought two 9 cm FEJKA plants, and they both had different stems. Using some pliers, I cut them off as low as possible, then remounted them on the inserts. In my case, they were press-fits, but you can easily use some glue to fix them.
Print settings:
- 0.2mm layer height.
- 10-25% infill for the base insert.
- 25% for the plant-specific inserts.
Scale the plant-specific inserts to your needs, if you want the plants to stick more out of the container or not.
Printed this on a Bambu Lab X1C with eSUN Matte PLA.