IKEA FEJKA mounts for IKEA SKÅDIS containers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hang plants onto your IKEA SKÅDIS pegboard.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 13
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
I wanted to decorate my office with some IKEA FEJKA plants, and hang them onto the IKEA SKÅDIS pegboard. These plants come with a fixed round plant pot, which does not easily fit into the rectangular SKÅDIS containers.
This print consists of two parts: the first part is the base insert, that goes into the container. The second are plant-specifc inserts (20x20mm) that go into the base. I bought two 9 cm FEJKA plants, and they both had different stems. Using some pliers, I cut them off as low as possible, then remounted them on the inserts. In my case, they were press-fits, but you can easily use some glue to fix them.
Print settings:
- 0.2mm layer height.
- 10-25% infill for the base insert.
- 25% for the plant-specific inserts.
Scale the plant-specific inserts to your needs, if you want the plants to stick more out of the container or not.
Printed this on a Bambu Lab X1C with eSUN Matte PLA.