MX Switch Plate Support Fork
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A MX switch plate support fork to prevent the switch plate from bending while inserting the switches.
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 1446
- Wydruki
- 11
- Wyświetlenia
- 6356
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3D printable switch plate holder that prevents the switch plate from bending while inserting switches onto the pcb, making the process a lot easier.
Variants
There are several .stl files of the switch plate holder with different thickness. Choose the file which is appropriate for the thickness of your switch plate.
1.5 - 1.6mm Plates (Standard Choice)
- Use the model with the thickness of 3.0mm.
- If the PCB uses Mill-Max Sockets 7305 then use the model with the thickness of 3.4mm.
1.7 - 1.8mm Plates
- Use the model with the thickness of 2.8mm.
- If the PCB uses Mill-Max Sockets 7305 then use the model with the thickness of 3.2mm.
1.9 - 2.0mm Plates
- Use the model with the thickness of 2.6mm.
- If the PCB uses Mill-Max Sockets 7305 then use the model with the thickness of 3.0mm.
Update: Upon request I added another model with a longer handle.
Recommendation: If these numbers don't mean anything to you, you'll most likely be totally fine with the Model “Switch-Plate-Holder-3.0mm”. This can be used pretty much on any keyboard builds.
Print Settings
- Infill: 15-20% Gyroid
- Perimeters: 2 (can also do 3)
- Layer height: 0.2mm
- Supports: none
Inspiration
I saw the tool being used on a Twitch Stream from Alexotos and was intrigued by it. The shapes are simple enough to be 3D printed so I gave it shot.