1 / 4
Accessible Boost 150w and Buck 300w converter case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to expose current / voltage trim-pots and screw terminals for adjustment without opening case.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
I like how the original design expose heat-sinks for better cooling, while remain pretty sleek. I remixed this design to:
- Make it a bit longer (a few mm) since the original didn't fit my 300w XL4016 buck converter board. I think the original case wad designed for OSKJ board, but the one I bought seem to be a copy of that so it didn't fit. (My 150w OSKJ boost board fit original case)
- Make holes on top cover to we can adjust current / voltage as well as all screw terminal without re-opening the case each time.
There are 2 choices for cover:
- Cover_Click_remix_v2: If you don't want to use any hardware at all. This cover will press down on the board and keep it in place.
- Cover_Screw_remix_v2: If you use screws to secure the board, print this cover. The “Click” cover doesn't leave any clearance so it won't fit with the additional thickness of screw-heads.