1 / 1
Treasure chest 2in x 4in box with lid hinges and pins
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a box. rectangular in shape, dastardly in spirit.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 290
- Wydruki
- 0
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (46)Powiązane
i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with hinges that dont break in the wind. the walls are kinda thicc so they can scale down niceliy if you size the pin hole on the lid to match raw filament or something better than a pin printed in the worst possible orientation.
i choose to use supports everywhere where daddy prusa says.
