Liczymy pasujące modele…
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
This is a model I made for a physics assessment for school, and thought I would upload it for other makers. I apologise if the instructions aren't clear as I haven't designed it around being constructed by others, but I will try my best…
This is a 1/10th scale compressor and rattle gun for the workshop as decoration or other. The rattle gun is Snap On style and would usually be red and comes with a 55mm nut that would usually by black, the compressor is made as to be…
made on TINKERCAD also follow me here and subscribe to "SAMI STUDIOS (SG_128)" pls it helps a lot
This device aligns two pieces of wood at a specified angle as a helping hand and alignment tool. I am using these to test dry-fit of my plywood cabinetry using biscuit joints. These make it a breeze to work with one joint at a time…
YouTube video - watch it! ER-15 is a toy that mechanically is a slingshot and is NOT A FIREARM and you can use for target practice around the house ER-15 - Ekcnheb The “ER-15” was created after the success of the model "E200" to improve…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you the Cute Hardworking Boys, a worker figure for a diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-).…
Working V6 engine , engine block from @Prusa research, pistons, crankshaft and stand made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be…
Toyota 22RE Mini Version Made as a desktop miniature, or as a rough representation of how the real thing works (only the pistons and crankshaft move), the crankshaft is able to be hooked up to an electric motor. Makes a great thing to…
Working I4 engine , engine block from @ericthepoolboy, pistons and crankshaft made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be used…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
Woodworking Joint Bridge - mixed to print flat for additional strength. I printed in black PETG. Strength: 4 wall lopes and 40% sparse infill density.
Take working mortar shell prints, then attach the detonator you will take from any pump action shell to the end, fill it with explosive, put a nail on the end to activate it and tape it lightly.
⬇ Files for download are available on Files → Other Files → Flick 19X Files. All project files are in .zip archive ⚔ Toy guns are back. ⚔ ⬇ Files for download are available under the Files tab. All project files are in .zip archive Flick…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
⚔ Like a Flick 19X. But much better ⚔ ❤ Subscribe to my Boosty https://boosty.to/myuto There is a free subscription, you can read news, see announcements and take part in polls 🎥 Full video uploaded! -> https://youtu.be/1q5rlmCZgGU ⬇…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
Working spring scale for toy kitchen. Uses up to 3 pen springs Print settings: Material PLA infil 5-10% (for pinion gear 20% or more) walls 2-3 supports enabled (I used auto, organic) Assembly guide: Insert pinion gear: Place the pinion…
Mounting plate and support/brace to complement HPGlass 's bench roller model. I didn't have PVC pipe on hand but I had plenty of M3 hardware laying around. Support rod needs 2x M3 FHCS screws. Any length between 10-15mm should be fine.…
Hey there, Makers! 👋 Meet the ERM-15 – a fully 3D printable toy rifle platform inspired by the iconic AR-15! This isn't just another blaster; it's a modular system with multiple configurations to suit your style. Whether you want a clean…
wider holes for wider screw heads. Based on the Latest version (v12)
Update: Added new profile that adds two updates. First, it also has the brim ears on 2mm, 3mm, and 4mm blocks to help improve the printing of those "cantilevered" thin pieces that have a tendency to warp. Second, it has labels imprinted…
This is a FreeCAD design of a print-in-place working cube in a cube gyro. I used the Assembly, Part Design and Spreadsheet workbenches to create it and have included two FreeCAD design files. Enjoy! A little support at the base of the…
Réglet de toupilleur marqué de 1 à 20 mm utilisé pour régler les machines-outils dans le domaine du bois. Bonne impression !
This guillotine model was designed for a school project. It is assembled in 3 parts, however in the picture I did not add one of the parts because it broke during printing. To make it simply print the parts, put the holder in to lock in…
A complete library of printable spacers for woodworking projects. Includes configurations covering material widths from 3/8" to 1" (imperial) and 12mm to 20m (metric) with gap sizes up to 1/2" (imperial) and 12mm (metric). Perfect for…
Lifesize model of a roubo woodworking bench. Print out of PLA with bench top upside down and legs standing up. I'm still working on the leg and tail vises.
This is a set of Corner Radius templates from 100MM - 200MM. This set is designed to be used with 3/4" wood. Works great if you have a router but can be done manually with a Jig Saw / Scroll saw but with a bit more finish work. May add a…
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
🎬 Video demo: https://www.youtube.com/shorts/SAGhfzj7YHM The main structural frame is laser-cut from 4 mm plywood on a CO2 laser cutter. The DXF file for cutting is located at rama_cut2.dxf. The frame is held together with M4 bolts. A…
Modified barrel assembly - rubberbands are now invisible unless the slide is pulled back. Use small (but not sharp) object to push rubberband between the barrel and the new shield.
I was dissatisfied with the other painting pyramid models, that were needlessly hard to print. I designed this painting pyramid with larger base to be both sturdier and to not warp on the print bed. I designed it with PETG in mind and…
Packout organizer for Klein networking tools. Occupies the left side of the organizer. Tools stored: Tone and probe kit - VDV500-063 Ethernet Cable Tester Kit with Scout Pro 3 Tester, Remotes and Adapter - VDV501-851 Impact Punchdown…
A travel case for your Philips OneBlade 360 and your accessories, featuring a "Kingdom Come Deliverance II" wooden chest design. I chose the yellow interior and the Icon to align with the design language of KCD2. You can fit: Philips…
This box supports the Z axis of my Ender-3 V3 printers whenever I work on the print head. Those tiny screws are easy to lose (and VERY hard to find in carpet) if you have butterfingers like me. It's basically a wastebasket with a cutout…
This is a working analogue clock for use on a busy board (or any other panel really). It's protected with an acrylic sheet at the top to make it fairly child-proof. It's mounted from the rear with two M3 screws. The "ears" in the corners…
I made this simple Gridfinity Box with Metric Spacer/Gauge Box in 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm thickness. I colorcoded each Spacer and also labeled them with white numbers. Each Spacer also has the corresponding radius on…
Ever wanted to setup a Victorian duel between your friends? How about a pirate boarding battle? A cosplay prop for your renfaire outfit? Or just a historical desktop fidget? Firing Video! Design Video Designed after a 'Queen Anne' pistol…
A fun mechanical fidget - 'semiautomatic' (fires 3 shots), prints easily without support, fits in the palm of your hand. NOTE: This gun is pretty tiny and cute - but don't ever carry or threaten someone with items resembling firearms. It…
Scrooge's Shotgun, The Door Knocker, Lincoln's Revenge - the Pennyshot Derringer! A 'working' derringer toy from the videogame Hunt Showdown - a clever, homemade-looking last resort. This does not fire anything - just a fun fidget. The…
'Working' prop of the Villiers 9mm Pepperbox Pistol , our "hero's" sidearm from Disco Elysium. Pull the trigger to drop the hammer, manually advance to the next round. Note: The barrels do not revolve when pulling the trigger. Early…
ski for dummy 13 model https://www.printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files
Just print this spring and baseplate in place of the original, snap them together into the original mag and enjoy! Note, this is the spring and bottom mag plate only. If you have the G19 remix by Stonepako then you have the rest you need.…
Get fast, repeatable accuracy in your shop with this set of imperial woodworking spacers. Designed for everyday layout and setup tasks, these spacers make it easy to dial in precise gaps, offsets, and reveals without fumbling around with…
I did not find a bit holder to fulfill my needs, so i made one. The way it is made magnetic, is by slicing it to have a filament change at the last layer where the holes for the magnets is visible. That gives your print a pause, so you…
Not really a remix. Someone asked for a box so I made one. Category: Tools
*WIP* working prototype Its working well but I want to polish it more. Suggestions welcome I wanted to get a Strainwave mount to use my C8 and replace the AzGti that was overloaded. After finding the Astrophilo project I decided to build…
Mini Airsoft Shotgun (3D Printed) Kleine, kompakte Airsoft-Shotgun, komplett 3D-druckbar und ideal für kleine Projekte oder einfach zum Spaß. Das Modell ist so designt, dass es Mini-BBs verschießen kann und einfach aufgebaut ist. 🔧…
Thin rip jig for use with table saws for making repeatable thin rips in material for facing plywood on cabinet and furniture or where ever thin material is needed. Allow for cuts up to 1 in, 25mm thick.
Print, then remove the 3 pieces from the printer plate and its ready to go!
Description This is a miniature of a large industrial ball valve. It was designed as a fun little "model kit" that can be easily assembled and the ball valve can open and close like the real one. It's easy to print and assemble, and…
A fun desk sign Working Hard or Hardly Working Category: Office
Design Concept This woodworking hand tool, the ink line marker, is designed with the goals of vibrant color, multifunctionality, and compact portability, allowing woodworkers or hobbyists to achieve precise marking with ease. The entire…
Woodworking Spend $500 On Tools Build A $20 Shelf
Professional 8-in-1 Radius Jig Set (High-Precision Woodworking) Engineered by a Senior Plastic Design Expert with 30+ years of experience using Siemens NX. This is a professional-grade set of two multi-radius jigs, designed to provide 8…
It is a mini model of a 3D printable working excavator. I have detailed it as much I can and also it requires so much less filament also I have made it like it require very less supports also it can be printed using any slicer. it has…
This is a V6 add-on kit for the 1:16 Toyota Tacoma RC and 1:16 Truck/Crawler Flexible Rolling Chassis models. When the chassis moves, the pistons pump up and down automatically. Required Hardware & RC Products 4x M2x6mm screws 4x M2x16mm…
I wanted a small blower for my firepit. This is a printed and tested model, everything fits an works as currently designed and uploaded. You will need to print the shaft spacer last so you can measure its height, and scale it vertically…
found my old thunderbolt files! the pole is 15mm dowel rod. Motor for the chopper is a n20 motor without gearbox this https://www.amazon.com/Acxico-6V-12V-Speed-10mm12mm-Electric/dp/B097M8PC53 just with a long shaft or any small motor…
This is a little plane I made. It will fly pretty well if you position the wings right. I recommend testing positions with tape before gluing them together. You can also get an idea of where to put the wings from the pictures. When…
This is a set of Corner Radius templates from 3" - 8". This set is designed to be used with 3/4" wood. Works great if you have a router but can be done manually with a Jig Saw / Scroll saw but with a bit more finish work. May add a 1/2"…
Just some templates to ease work on leather chess board
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Super easy print! Just fill the print bed and go! I recommend printing with Smaller Layer Heights to keep the rigidity of PLA with 100% Infill . Please feel free to play around and let me know if you feel like any other materials work…
Ruler and marking gauge in cm/mm for woodworking. New version with 1-55mm and more compact in other dimensions as well. Check out the full size versions here: https://www.printables.com/model/359539-woodworking-marking-gauge-and-ruler The…
Working station with sorting tray and tool holder with the dimensions of 235x235 mm it fits perfectly on the build plate of many printers the 10 sorting compartments help to keep the individual components seperate with the tool holder,…
Working on my setup. Printed successfully in PA12 CF15 and haven't try in order materials. Print it with one of the laterals facing the building plate I'm using it with the K part for Sherpa mini. The PTFE length used should be the same…
Fed up with having to manually adjust thread faces in Fusion 360 to give a clearance, I worked on creating an adjusted Fusion 360 Thread parameter file. Note even these maximum clearance threads will still require ‘breaking in’ so that…
This is a set of templates I created while building my aquarium stand. I used them as patterns for cutting out the decorative arches and Corbel's. I thought they might be useful for someone else doing some woodworking. The front arc was…
This is a set of three bar gauges. Bar gauges are used to check inside dimensions on things like boxes, drawers, cabinet openings, etc. For example, when construction a wooded box, it is typical to check that the inside diagonals to see…
Working model of a Mazda 13B-REW Wankel rotary engine. Found in the RX7. Modeled from what was available on the internet. Mostly from pictures and diagrams. So most parts look right but are not dimensionally accurate. the scale is the…
For ornamental holes and for hexagonal bolts. Used with https://www.printables.com/model/1007918-drill-holder-for-square-hole-boring 28.04.25: SW15 Holder added.
Feeding is spotty at best, don't print it and expect to have a functional mag. After years of tinkering and starting many times from scratch, I've decided to post it, maybe someone will find a solution to my problem. The goal was to make…
Note: this is an accessory for the Dummy 13 figure created by soozafone, which you can get here: https://www.printables.com/model/981111-dummy-13-version-10 I designed an Olympic barbell for Dummy 13 figures, complete with functioning…
This design is intended to create templates for crafting baby teethers from wood using a router. These templates can also be used to create accessories for a baby gym. However, please note : if 3D printed, these should not be used as baby…
This is a simple and quick model for my woodworking centre finder for drilling. I set wall loops at 5 and infill density at 50%, although you may get the same functionality with fewer infills.
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
The atom models are designed to be able to make actual chemical bond using magnets. They lay on the octet rule for chemistry. The electrons used are only from the outer shell of an element. The molecule in the photo is NaOH. Consider…
No support, no raft. 2h 45min of printing. Holes for: -3mm -4mm -5mm -6mm Holes directions: 30° - 45° - 90° Print Settings Rafts: No Supports: No **Infill:** 20% Filament: 3dJake PLAHow I Designed This I designed this on fusion 360…
This is a model I made for a physics assessment for school, and thought I would upload it for other makers. I apologise if the instructions aren't clear as I haven't designed it around being constructed by others, but I will try my best…
This is a remix of the stand for the jet engine of rndmframes_printing. It has the correct scaling and correct fittings for the engine-shape. The print takes rougly 3 hours. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
I printed the legs in yellow PLA plus, the brims in black PTEG, and the net in black TPU with an 8mm nozzle. the bag I also printed in black TPU with an 8mm nozzle. You can use a Nerf Rivel dart or print a mini spike ball to use as the…
This is a 1/10th scale compressor and rattle gun for the workshop as decoration or other. The rattle gun is Snap On style and would usually be red and comes with a 55mm nut that would usually by black, the compressor is made as to be…
made on TINKERCAD also follow me here and subscribe to "SAMI STUDIOS (SG_128)" pls it helps a lot
So I'm in the process of designing a left handed version of the Logitech MX Master 3 since I've long given up hopes for Logitech to ever cater to the left handed marked. (for now I still think it's doable with only a donor MX Master 3 and…
This is a model of the top handle for a small ‘woodworking’ clamp from Aliexpress, with a maximum opening of 105mm. Printer : Anycubic Kobra 2 Pro Material : PETG (Sunlu) Temperature : 225°C Layer height : 0.08mm Print speed : Lowest…
This model works well with 3mm wooden skewers as the rods, but these can also be printed. Use some glue to hold everything together, you can leave the legs unglued in case don't always want to have it standing.
Headlight Kit for Dummy 13 Dirt Bike Add some illumination to your playtime! Designed to power a headlight LED, this sleek design fills the void where the motor would go by incorporating a battery pack in it's place. This works off of 2-3…
This device aligns two pieces of wood at a specified angle as a helping hand and alignment tool. I am using these to test dry-fit of my plywood cabinetry using biscuit joints. These make it a breeze to work with one joint at a time…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
Remade the Stryker's trigger with little to no deadzone. (minus the clip to engage the lock for the slide, i removed that on mine. ) Safety works as well, I included a remade safety switch that should be a tiny bit shorter while still…
Quadruple boomerang You can change the infill however you want, but I recomend 5 walls for strength. If your printer is too small you can scale it down a little. I reccomend PETG. Happy printing!
A bracket to build woodworking projects like a 3D printer stand using 2x3 lumber. These brackets are strong, but they are not meant for large heavy duty projects. This design is based on many of these style brackets found in hardware…
Woodworking square - good for quiding or clamping
This model is my V1 of my Woodworking Square w/ Push Tab. I have now made a V2 that is ENTIRELY 3d-printed! Just as strong and actually more effective, as I have gone back and made small but significant changes to allow better ease of use…
