Working Pickleball Paddle!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After multiple iterations, I've been able to design and print the world's first working 3d printed paddle!
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 757
- Wydruki
- 2
- Wyświetlenia
- 6211
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The paddle was printed on a Bambu Lab P1P but should fit with any printer with 256x256mm. I will later add the design that allows you to print in a smaller printer. Make sure you have these settings on the individual parts:
Top Paddle, Bottom Paddle and Handle-Plate:
Top Shell = 1, Bottom Shell = 1
Handle Guard and Top Plate:
Top Shell = 1, Bottom Shell =2
Overall Settings:
Triangles Infill at 15%
PRINT IN ABS
The reason why you want these settings is to allow the paddle to be lightweight as well as sturdy enough to hit the ball. I had issues with other iterations where the handle would break off before the paddle so that is why there is a handle guard that protects the weakest part.
Edit:
I added a version of the paddle to fit your printer. However this will be the standard thickness of a regular paddle.
Assembly:
I highly recommend soldering the top and bottom paddle together and gorilla glue the plates on top to give it for durability. After gorilla gluing everything, I would solder the plates to the paddle parts on the sides to give it extra protection. Below is a link of the edge guard I used to protect the edges of the paddle:
https://www.amazon.com/dp/B0BTP415Q4?psc=1&ref=ppx_yo2ov_dt_b_product_details
If the link doesn't work, it's a furniture edge guard with a 9mm thickness.