Liczymy pasujące modele…
This pickleball paddle holder is designed for easy and organized storage of a standard pickleball paddle. The model is optimized for 3D printing and provides a simple, sturdy way to keep paddles off the floor and within reach.
this is a pickleball that i designed and printed in multiple tpus and hole patterns my best result is the model above in tpu 64d. feedback would be great. I've only had problems with cracking while using it let me know if yours are…
Small 7" pickleball paddle, ball, and 0-0-2 wall art. Should be built to be sliced for multicolor. I didn't have any good colors laying around to do it justice and my gold was wet during this print.
Pickleball Ornament Plug This pickleball is made specifically for outdoor with a hole diameter of about 7.16mm/0.282in. If you're running into issues such as the plugs coming off too easily or it's too tight of a fit, try increasing the…
this is a pickleball that i designed and printed in multiple tpus and hole patterns my best result is the model above in tpu 64d. feedback would be great. I've only had problems with cracking while using it let me know if yours are…
I had a request to create a Pickleball net-clip to indicate that the game within a league completed for a team, but the team wants to continue playing while the other teams are still competing. In that way there is no confusion whether…
This is a very simple model for a Pickleball target that clips on the net to train the proper hit height on dinking, dropshots, and drives. I made one out of PLA that I blasted with a drive (it was hit the back wall hard lol) from the…
This pickleball paddle holder is designed for easy and organized storage of a standard pickleball paddle. The model is optimized for 3D printing and provides a simple, sturdy way to keep paddles off the floor and within reach.
Cute pickleball geocache perfect for a lamp post skirt outside your favorite pickleball courts. The ball and paddle screw together enough to keep the water out but not enough to annoy the person opening it. I used 10% infill and no…
I tried to do this face up, but it wasn't working out, the frame was thin and pulling off the supports no matter what, so I changed it to a face down style and separated off the ball and paddle, which is much better. You will have to glue…
Updated on 27 February 2026: A hole has been added to prevent blocking the rear LED on the controller. The gap between the handle and the blade has been reduced from 0.3 mm to 0.15 mm in order to improve glue adhesion. #Instruction: Since…
A compact keychain design combining the word 'LOVE' with a pickleball motif. Features a built-in keyring hole and prints
Based off of the original quad coupler but added a ring for carabiner to attach to fence or backpack
This 3D-printed pickleball paddle is designed to fit on an 18 cm³ build plate, adhering to USA Pickleball recreational size rules. The paddle measures 16 in (406.4 mm) in length and 8 in (203.2 mm) in width, matching the regulation total…
Introduce your little ones to the fun of pickleball with this toddler-sized paddle! Designed with four easy-to-assemble pieces, its a safe and lightweight option for kids who want to be just like their pickleball-loving parents. The…
I created a Pickleball Tombstone to memorialize a poor pickleball that was taken out of service way too soon. One person in our foursome got frustrated by losing about 10 net cords in two games from the same person and took his…
Pickleball Paddle for the Dummy 13 and Mini 13 action figures. It was designed so the frame and blade could be printed in separate colors. I used super glue to secure the blade. Enjoy!
Elevate your jewelry and crafts with this unique pickleball bead —a must-have for pickleball lovers! Designed for 3D printing , this bead captures the signature perforated look of a pickleball, making it a fun and sporty addition to…
This mount was specifically designed to be compatible with the Insta360 selfie stick, but it also works with any standard 1/4" screw accessory. It's perfect for capturing pickleball or tennis games and can be securely mounted on top of…
Yet another Dummy/Mini 13 Pickleball Paddle ... but this one has MMU support.
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
A simple Pickleball trophy. The text plaque is printed separate and meant to be glued on, this allows for printing the text without an automatic material system. To fit the paddle in properly you might need to shave a small amount of…
This is a simple pickleball ball carrier I designed that allows you to keep your balls with your paddle when going to and from the game and the then while you are playing pickleball the carrier is small and flexible to store in your…
OK, this paddle is loud, alarmingly loud. Get yourself banned by your HOA loud. That said, it plays pretty well, although not the liveliest of paddles. In the one (and only) game I played with this paddle (which I won, BTW), only once did…
I made a couple different pickleball paddles, based off of a wide body paddle measurements. The paddle should be within pickleball specs provided no dimensions are changed to be larger than the current model. Minimum print area is 12.5 x…
For Pickleball fans- this is a Pickleball Straw Topper to add some “bling” to your Stanley tumbler. The top and bottom opening is 10.5mm Printed with PLA on a Bambu Lab P1S No supports needed
A Pickleball Pal for your Stanley Tumbler Straw . There are 2 sizes: Small - 40mm Medium - 60mm The cutout for the straw is 10.5mm Printed on a Bambu Lab P1S with PLA and a PETG raft for support
Works will with almost all paddles. I use it on my Selkirk Latitude 2.0 If you wish to customize the pickleball upper/gripper with your name - Use this tool spaces.streamlit.app Please comment where it doesn't fit any paddle and I'll…
*** Opens Pokédex*** Pickleboltorb, the Pickleball mimic Pokémon. Often found in proximity to sports complexes and community centers, this Pokémon's unique color scheme allows it to blend in with pickleball equipment. Its electric…
Building on what I learned from the first couple of paddles I made… This paddle is 13.5mm thick, with a different core design, frame width, and face thickness. I printed the paddle in PETG with 25% gyroid infill. 5 vertical walls 6…
Another week, another change… This paddle is based off of the 13.5mm paddle I printed. We added an opening through the paddle to reduce weight and the handle was changed to allow for more grip room. The paddle was printed from PETG while…
I print with the bottom flat, uses the least amount of support. There's a hole at the bottom of the fence side - you can put a zip-tie through there to secure it to the fence in a more permanent way.
Make sure your pickleball champion gets the trophy they deserve! Printed without any supports. Base is 4" by 4", and entire trophy is 7" high. Stl file is blank. 3mf file has “Pickleball Champion” text that is a cut text object, feel free…
Feet to raise up the net, allowing for more balls to be held in the machine's hopper, and to make the bottom of the net ‘net height’ about 36". remove the endcaps on the base, feet just slide on and put caps back.
Holds a Pickleball Paddle with installed cover to the wall for easy access. Uses 2 of these screws and sheetrock anchors…https://www.homedepot.com/p/Triple-Grip-8-1-1-4-Gray-Ribbed-Anchors-with-Screws-100-Pack-171K/202527079 If you want…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I needed to reduce the power of my 681 in order for the ball to bounce before shooting over my small patio, this slide on TPU pad absorbs some of the push. you can play around with where you place the pad on the machine's arm to change…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print without support, zip tie it through the net for secure.
In a recent volume of Make "Makezine" (Volume 95, pg 108), Bob Knetzger introduced his Pocket-Pinball game to the world. It is designed for a laser cutter and an .svg was downloadable. Bop's inspiration was “Cap'n Crunch Thumb Tennis” by…
This model produces a 20 mm diameter pickleball which can be used for earrings. You can scale it up or down for your needs. It's printed in PLA and some manual support is added to the bottom, mainly to keep it stuck to the bed surface.…
I’ve created a clean, simple and modern 3D model of a pickleball paddle. It’s available in two printing formats so everyone can use it—no matter the size of their printer. ✅ Full-Size Paddle Plane (for printers 250×250×250 mm and above)…
Have tried on a few different 16mm paddle with an edge guard. These weigh just over 4 Grams each. The hole can be used to add additional weight if necessary.
Small 7" pickleball paddle, ball, and 0-0-2 wall art. Should be built to be sliced for multicolor. I didn't have any good colors laying around to do it justice and my gold was wet during this print.
Pickleball Ornament Plug This pickleball is made specifically for outdoor with a hole diameter of about 7.16mm/0.282in. If you're running into issues such as the plugs coming off too easily or it's too tight of a fit, try increasing the…
Inspired by something i saw on Instagram, original didn't publish the files. But objective is to place over the net in the corner, insert your phone and record / take photos. T - Side is for tennis aimed to the centre T of the court on…
3D model description 🎾 Capture Your Pickleball Matches — Hands-Free This Pickleball Net Phone Holder STL is designed to securely hang your smartphone on a pickleball net, giving you a stable, elevated angle to record your games, drills,…
I had a request to create a Pickleball net-clip to indicate that the game within a league completed for a team, but the team wants to continue playing while the other teams are still competing. In that way there is no confusion whether…
Phone holder to be mounted on the court net. No other equipment needed! Easy to print. The slots are large enough so that phones can be inserted with cases. If you have some ideas for changes, let me know. And please give the model a like…
This is a very simple model for a Pickleball target that clips on the net to train the proper hit height on dinking, dropshots, and drives. I made one out of PLA that I blasted with a drive (it was hit the back wall hard lol) from the…
Cute pickleball geocache perfect for a lamp post skirt outside your favorite pickleball courts. The ball and paddle screw together enough to keep the water out but not enough to annoy the person opening it. I used 10% infill and no…
I tried to do this face up, but it wasn't working out, the frame was thin and pulling off the supports no matter what, so I changed it to a face down style and separated off the ball and paddle, which is much better. You will have to glue…
Simple net phone holder to record your matches
This door hanger is just a place holder for players to know who is next in que to play.
This is a simple pickleball holder I designed that gives you a place to set the ball in-between games or when you are taking a break. The holder is designed to clip on to the top rail of a chain link fence that is commonly used around…
Eine komplette und funktionsfähige Ballmaschine für Erwachsene zum selber bauen. Die Datei ' 0_no_print_extern_schwenken_stl' beinhaltet eine Explosionsdarstellung, bitte diese Teile nicht zum Bau dieser Maschine verwenden. Siehe mein…
I created a Gen 2 Wooden Pickleball Paddle Template. The intent of this design is have a template for creating original wooden pickleball paddles. From my research, I believe there were 2 or 3 original designs. This design was generated…
This is a remix of MORONs Trophy, I embedded a pickleball in the middle where the medal plate would normally be. I whipped this up for a 4th of July tournament my neighbors are hosting. I used tree slim support, which was a bit of a pain…
Pickleball Edition emblem for your car, prints face down on a holographic/super smooth plate, recess for double sided trim tape, i use 3M automotive. I printed in petg to stand up to the heat/sun better
A simple clip to hold one standard 73mm pickleball. There's a loop into which you can place a ring or clip of your choice; the orientation of the loop allows placing something in there during the print to make it captive. No supports…
Gotta love that Pickleball !!! 2 parts, nothing fancy. You might need a drop of glue.
2 Parts with 2 drops of glue: The base has a slightly flat top to allow for some bridging possibly hanging down from the interior of the ball. You may need to nip off a few pieces of that bringing. I twisted a drill bit by hand to clean…
5/7/2024 UPDATE: I updated Trophy_v7.3mf to enable editing of the “#1 Dinker” text. I also added STLs for 1st, 2nd, and 3rd place. Enjoy! ================================================= I designed this primarily in Fusion360 and tied…
Let's Pickleball. Zero Zero 2 !! It's 2 parts: Base and Ball. I used PLA and the Ball snapped into the Base without glue. As soon as I started printing the Ball, I reduced the speed on my Mini LCD from 100 to 50, resulting in about double…
This is v1.0 of a paddle design that can be printed on a Prusa MK3/4 print bed size (X×Y×Z, 250 × 210 × 210 mm). Materials needed: (2x) round wooden dowel, 3/8in diameter, 150mm length Glue/Epoxy Clamps Spare wood/flat surfaces A sense of…
This is a sturdy repair for when the center pole of a pickleball net breaks through the top ‘tape’ of the net. I recommend: Use TPU type filament for strength and durability Print the part laying on its side for maximum strength in the…
No support is needed for this quick and easy print! I printed my model with white Visdream PETG @0.20mm variable layer height. This was partially designed on Fusion360 and assembled in Prusaslicer 2.6.0-alpha6+. If you love pickleball,…
This is v2.0 of a paddle design that can be printed on a Prusa MK3/4 bed size (X×Y×Z, 250 × 210 × 210 mm). Suggested filament per part(s): TPU - Handle Grip, Handle Cap PP - Body Infill, Handle (to help reduce weight) PETG/PET - Surface…
This is v3.0 of a paddle design that can be printed on a Prusa MK3/4; bed size (X×Y×Z, 250 × 210 × 210 mm). Revisions: Removed the need for dowels and replaced them with a variation of a half-lap joint between the body and handle Body and…
This is a pickle ball racket that can be printed and then glued together. I printed using 15% infill and a gyroid infill, but the weight was 400G which is at the maximum allowable. I also used 10% infill and adaptive cubic on another…
This is a pickle ball racket that can be printed and then glued together. I printed 0.3 layer height using 10% infill and adaptive cubic on another design and that worked quite well and ended around 300g. I added Brims, removed the bottom…
Love my Pickleball ! There are 5 parts: Base, Stars, Paddle, Paddle Face, & Nameplate (Qty. 3). Printing: For the Base, move the seam to the rear, away from the Nameplate side, to prevent some visible wrinkles. Color change at 3.20 for…
A custom made pickleball trophy for 1st ATP(around the post). I easily printed this with no supports. We've started playing pickleball with friends and I've started custom making little trophies for fun handouts to play for. I've only…
This model is a rescaled remix of a model that lets you hang the Bird Pickleball Falcon Elite on your shorts for convenience. I recommend it in black PETG. Sometimes the clip part fuses lightly in the print process, but they can be wedged…
Pickleball paddle holder for mounting your paddles on the wall. I've included an STL with screw holes, and one without. I printed the one with screw holes but decided to use 3M Command strips (removable adhesive strips,) to see if it'd…
Customizable stencil for marking pickleballs to be able to easily tell which ones are yours. I've included the original stl shell that fits 73mm diameter (standard) pickleballs (I tested this on Onix pickleballs, shown in pictures.) Load…
The paddle was printed on a Bambu Lab P1P but should fit with any printer with 256x256mm. I will later add the design that allows you to print in a smaller printer. Make sure you have these settings on the individual parts: Top Paddle,…
Unleash your love for pickleball in the coolest way possible with our pickleball paddle keyring! Not only does it shout out your passion for the sport, but its customizable paddle face lets you add your own flair or message, making every…
Updated version of the previous paddle designed to print with PETG or PLA+. Have to angle it a little weird to fit a 256x256mm bed but will do the job. Added a blank pommel for you guys to customize! (Pommel is not required but makes your…
This is a pickleball ball holder, I only have two balls for playing so I only needed something small to hold them together, which helps make life easier—something I made and designed. The program used to create this model is TinkerCAD.
Here is a Pickleball Trophy I designed for my wife's Pickleball group. It was printed with an MMU, but can be printed in a single color, or multicolor with manual filament swaps. An actual Pickleball was glued to the top of the trophy and…
Pickleball trophy Done in parts to save waste. Base, statue, plaque This guy is small, but could be scaled as big you want. Just make sure you scale everything. I printed mine with an ams but could be printed with color swap (will have…
This is an adapter for the Quest 2 controller. It uses the original SANLAKI holder for the controller and a bigger handle for pickleball. After printing I gripped it with my normal tennis grips. Handle should be printed upright and the…
This pickleball ring is great to print for fun, or even to use as good luck charm for your next big pickleball game. Simply print the ring facing upward, and add a brim or supports to prevent it from tipping while printing. The entire…
Print this in two colors and glue together. This is the glue I use for PLA: https://amzn.to/48KNzPy - two part activator & CA glue. Note: you can use the activator with any CA glue (affiliate link). Inspired by the similar model by…
I was looking for a minimalist pickleball display and couldn't find one. Built this one for my Franklin Signature paddle (https://franklinsports.com/franklin-signature-pickleball-paddles-new-1). It should fit most pickleball paddles. No…
One of the more dense ways to carry pickle balls. Pickleball holder designed to fit 3 Pickleballs
This paddle needs tweaks as it breaks at the neck. Don't print for now. If you want, use it for inspiration to improve. Intro: Pickleball paddles can be ridiculously expensive. However, they are super simple dimensionally. This paddle…
