Pickleball Ball Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop digging around in your bag to find your ball. Hang it on the outside with this holder.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 197
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple clip to hold one standard 73mm pickleball. There's a loop into which you can place a ring or clip of your choice; the orientation of the loop allows placing something in there during the print to make it captive.
No supports required but I would add a brim around the base of the attachment loop.
Edit: I enlarged the hole slightly to allow for the inclusion of a printed carabiner clip. The one I used was the excellent Utility Carabiner from 3D Kimba scaled down to make it 6mm thick. If you're quick you can drop it into place without pausing.