Pickleball Ball Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stop digging around in your bag to find your ball. Hang it on the outside with this holder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 197
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A simple clip to hold one standard 73mm pickleball. There's a loop into which you can place a ring or clip of your choice; the orientation of the loop allows placing something in there during the print to make it captive.
No supports required but I would add a brim around the base of the attachment loop.
Edit: I enlarged the hole slightly to allow for the inclusion of a printed carabiner clip. The one I used was the excellent Utility Carabiner from 3D Kimba scaled down to make it 6mm thick. If you're quick you can drop it into place without pausing.