Pickleball Paddle v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Still not USAPA approved. Still not a Joola. But it's a paddle. And you can print it! Again!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is v2.0 of a paddle design that can be printed on a Prusa MK3/4 bed size (X×Y×Z, 250 × 210 × 210 mm).
Suggested filament per part(s):
- TPU - Handle Grip, Handle Cap
- PP - Body Infill, Handle (to help reduce weight)
- PETG/PET - Surface
- PLA - Handle Peg (you can try PETG/PET, but it was much easier for me to just print this in PLA)
Other Materials Required:
- (2x) round wooden dowel, 1/4in diameter, 60mm in length
- Glue/Epoxy
- Clamps
- Spare wood/flat surfaces
- Low Expectations
Printing Notes:
- I printed with a 0.6mm nozzle and 0.3mm layers.
- Check that the handle thickness is equal to the sum thickness of the two surfaces and the body infill (if you want to make the paddle as flush as possible).
- May need to adjust the Handle Cap height to fit flush against the Handle Grip; dependent on the material shrinkage.
Assembly Notes:
- Print two faces, and glue to each side of the body infill.
- Use the Handle Pegs to help align the Handle Grip. I glued the grip, you can also wrap the grip in place.
Final Thoughts:
I printed the body infill in TPU. I didn't have PP. The Surfaces were printed with CF PETG. Although the surfaces printed flat, they had a slight curve when I removed them from the build plate. I glued the Surfaces to the TPU Body Infill piece, and the TPU Body Infill piece inherited the curve from the Surfaces. Now I have a oddly curved paddle.
My paddle still works and delivers a nasty curve! But it is heavy!
I highly recommend ordering PP for the Body Infill. I anticipate PLA may also work for the Body Infill to produce a straight paddle, but it will likely still be heavy.
An ideal comfortable Pickleball paddle weight is about 7-8 ounces (198-227g), I think my paddle is close to 10-11oz (283-311g). I think PP will help lower weight significantly.