Wall Mount Pickleball Paddle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a Pickleball Paddle with cover onto the wall using 2 screws and 2 sheetrock anchors.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 500
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Holds a Pickleball Paddle with installed cover to the wall for easy access.
Uses 2 of these screws and sheetrock anchors…https://www.homedepot.com/p/Triple-Grip-8-1-1-4-Gray-Ribbed-Anchors-with-Screws-100-Pack-171K/202527079
If you want to use a different screw you need to match the Major Diameter of the screw which is .170" or 4.32mm and the head diameter of about .3095" or 7.86mm and a head height of .120" or 3mm in order for the screw to sit recessed into the counterbored hole.
Any layer height should work. I used 0.20mm with PLA. I would recommend at least 3 or 4 perimeter layers and 25% infill.