Wall Mount Pickleball Paddle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a Pickleball Paddle with cover onto the wall using 2 screws and 2 sheetrock anchors.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 214
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Holds a Pickleball Paddle with installed cover to the wall for easy access.
Uses 2 of these screws and sheetrock anchors…https://www.homedepot.com/p/Triple-Grip-8-1-1-4-Gray-Ribbed-Anchors-with-Screws-100-Pack-171K/202527079
If you want to use a different screw you need to match the Major Diameter of the screw which is .170" or 4.32mm and the head diameter of about .3095" or 7.86mm and a head height of .120" or 3mm in order for the screw to sit recessed into the counterbored hole.
Any layer height should work. I used 0.20mm with PLA. I would recommend at least 3 or 4 perimeter layers and 25% infill.