Drone Flute (fully 3d printed, working)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional drone flute, only needs some glue after printing.
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 753
- Wydruki
- 1
- Wyświetlenia
- 5498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully 3d printed working drone flute. At 90% scale (the size I printed it as so it could fit on my build plate), this instrument is in the key of E. If you print it at 100%, I believe it is in the key of D, but I am not sure.
You need to print 2 “Native_American_Style_Flute_-_Bird”
After printing, I sanded the ends of the flute and super glued them together. Then, I played around with the positioning of the bird until it made a nice whistle noise, then I glued it there by only placing glue on the edges. After that, I repeated it for the other side.
Pla with 25% infill would work, no supports, and I used a brim but it is probably not required.