1 / 1
Wera Big Pack 900 13 piece compact wall or pegboard holder with labels — zdjęcie 1

Wera Big Pack 900 13 piece compact wall or pegboard holder with labels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a "compact" wall or pegboard holder. It is still quite large but quite long and therefore space efficient.

Ocena
0 / 5
Polubienia
16
Pobrania
70
Wydruki
0
Wyświetlenia
389
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This is a "compact" wall or pegboard holder. It's still very large though.

I printed it with 40% lightning infill which only used ~200g filament instead of almost 500g with regular cubic. It's sturdy enough.

If you put 2x M4x15 screws into M4 nyloc hex nuts at the back and tighten them just enough that it slides into the pegboard with a little bit of force it will hold due to friction.

Can also be put straight onto a wall or anything else. Step file is provided if you need to design different holders.

Tagi