P
PrintablesKVEL
WERA electronics screwdriver holder
Simple holder for Wera electronic screwdrivers.
- Pobrania
- 515
- Polubienia
- 79
- Ocena
- 5
Wyniki wyszukiwania: wera
975 modeli
P
Printablesteslapunk
Wera Tool-Check wall mount or Pegboard holder (IKEA Skadis / Wall Control)
This is a simple holder for your Wera Tool-Check. There is a version for screwing to your wall and one each for IKEA Skadis and Wall Control pegboards available. Prints well in the orientation as it comes from the STL file using PLA with…
- Pobrania
- 465
- Polubienia
- 108
- Ocena
- 5
P
PrintablesSirPrintsALot
Wera Joker Wrench Hanger
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
- Pobrania
- 227
- Polubienia
- 80
- Ocena
- 5
P
Printablesteslapunk
Wera Wrenches 395 HO/7 SM wall mount / IKEA Skadis Pegboard holder
This holds the 7 Wera Wrenches in place. Distance of 5mm mounting holes is 45mm from hole to hole. PLA or PETG with 15% infill and 0.2mm layer height will do the job, print orientation as ist comes from the STL file. For the IKEA Skadis…
- Pobrania
- 196
- Polubienia
- 38
- Ocena
- 4,67
P
PrintablesA.F_3D Print
Wera Hex + Wera Torx Organizer
I needed a larger compartment to hold my Wera hex and torx, so I made a remix, so I could adapt it to my Fasano tool trolley. Plus it fits perfectly in my Fasano tool cart. I printed them with my bambulab p1s. The folder also contains the…
- Pobrania
- 193
- Polubienia
- 45
- Ocena
- 0
P
PrintablesHeine Sørensen
Wera Kraftform style Allen / Unbrako / HEX key
Hack up your allen keys , heat key up and insert into handle.
- Pobrania
- 146
- Polubienia
- 23
- Ocena
- 0
P
Printablesargoroots
Box for Wera Kraftform Kompakt VDE 17
Box for Kraftform Kompakt VDE 17 Universal 1, 17 pieces set . Requires 8 strong 3x2mm magnets to hold cover.
- Pobrania
- 126
- Polubienia
- 18
- Ocena
- 0
P
Printablesovercast
Wera Kraftform Kompakt VDE - Sortierschale
Einsatzschale für die Wera Kraftform Kompakt VDE Einsätze wie es sie oft im Set zu kaufen gibt. Durch die Griffmulde können die einzelnen Einsätze leicht entnommen werden. Die Einsatzschale ist auf Grund des Druckbereichs des Prusa Mini…
- Pobrania
- 111
- Polubienia
- 18
- Ocena
- 5
P
PrintablesDavid Gerke
Wera Adventskalender 2021 / French Cleat etc.
Ich habe mir diese Halter für die Schraubendreher von Wera Konstruiert. Das Set besteht aus dem Adventskalender 2021. Die Bezeichnungen habe ich mit Buntlack angemalt. Alternativ kann man natürlich auch mit Filamentwechsel farbig drucken.…
- Pobrania
- 100
- Polubienia
- 33
- Ocena
- 4
P
PrintablesJeroen3
Wera KK 13mm socket adapter
13mm socket insert to attach your favorite Wera KK screwdriver insert to your favorite torque driver. Included also a longer version for the long socket. Print instructions Obviously this is not VDE 1000V anymore. Print 0.2mm 100% infill,…
- Pobrania
- 74
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKuberman
Wera Tool-Check Modular Clip Add-on
It is a clip for the Tool-Check Modular from the Wera Advent Calendar 2024. It can simply be printed out and attached. I printed it with PETG, with 4 wall perimeters and Gyroid 20% infill.
- Pobrania
- 70
- Polubienia
- 19
- Ocena
- 4
P
Printablesaott33
Wera 395 HO Nutdriver - Triton Pegboard Holder
Inspired by the following: https://www.printables.com/model/106585-wera-wrenches-395-ho7-sm-wall-mount-ikea-skadis-pe https://www.printables.com/model/139416-wera-scredriver-holder-for-workshop
- Pobrania
- 68
- Polubienia
- 12
- Ocena
- 0
P
PrintablesKuberman
Wera Tool-Check Modular S11 (RovyVon A5) LED flashlight
This is an add-on for the Tool-Check Modular from the Wera Advent Calendar 2024. It can be easily inserted into the existing rail. It is suitable for the following S11 LED flashlight. (RovyVon A5) The head of my lamp has a diameter of…
- Pobrania
- 64
- Polubienia
- 19
- Ocena
- 0
P
PrintablesJascha3D
Wera ToolCheck Modular Mount for IKEA Skådis Pegboard
Wera ToolCheck Modular Mount for IKEA Skådis Pegboard 🔧 This custom-designed mount lets you securely attach your Wera ToolCheck Modular set to an IKEA Skådis pegboard . Whether you're organizing your workshop or just want your essential…
- Pobrania
- 57
- Polubienia
- 6
- Ocena
- 5
P
PrintablesLucianociri
Screw driver stand wera estante para destornilladores
Este soporte para destornilladores Wera, impreso en 3D, ofrece una solución práctica y organizada para almacenar tus herramientas. Diseñado para maximizar el orden y la accesibilidad en tu taller, este estante está hecho con material PLA…
- Pobrania
- 54
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMAM3D
Wera Kraftform Kompakt VDE Inlet
Here is the inlet for the holder “Wera Kraftform Kompakt VDE", which I also constructed. This inlet is freely customizable only the individual parts must be combined. The files are available as STEP and as 3mf. This insert has no symbols…
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDelta
Wera Kraftform Kompakt VDE Tool Holder 817 - 16 pieces - perforated panel (10x10mm)
Tool holder for Wera Kraftform Kompakt VDE 817 with 14 bits (05003474001 / 05006607001) This seems to be the product on Wera website (mine was from amazon [05003474001] without the nice colors 😥)…
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 5
P
PrintablesJascha3D
Skådis Wera Stubby Screwdriver Mount
Skådis Wera Stubby Screwdriver Mount 🔧 This is a remix of the original Skådis Wera Screwdriver Mounts , redesigned to fit the Wera Stubby Screwdriver . The original mounts were made for full-size Wera handles. I scaled and adjusted the…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSmithChart
Gridfinity Wera Kraftform Kompakt Holder
This is a simple Gridfinity holder for the Wera Kraftform Kompact. It's non stackable, since the tool protrudes out anyway. FreeCAD file provided for those playing along at home.
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJascha3D
Wera Magnetizer/Demagnetizer Holder for IKEA Skådis
Wera Magnetizer/Demagnetizer Holder for IKEA Skådis This custom holder is designed specifically for the Wera Magnetizer & Demagnetizer tool 🧲and fits perfectly on the IKEA Skådis pegboard. Keep your essential tool organized and easily…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 5
P
PrintablesJohn 14:6
Chick waterer - Powerade Bottle Threads - Three Sizes plus Anti Drown Model
Chick waterer made for the powerade zero triple thread bottle. Fills up about halfway in the bowl. There is also an anti drown model that should work good for quail chicks. But there are three sizes to fit any need! I made a holder with a…
- Pobrania
- 28
- Polubienia
- 6
- Ocena
- 0
P
PrintablesIZ Labs
Wera Advent Calendar 2025 Pegboard Mount
A simple mount to hold the included tool holders / organizers from the 2025 Wera Advent Calendar. This will fit on standard 1" spaced pegboard and uses the MegaMount system. If you were lucky enough to receive one of these calendars I…
- Pobrania
- 27
- Polubienia
- 7
- Ocena
- 0
P
PrintablesHarsesis
Wera 7400 Torque Screwdriver Holder (7440 + 7441)
I created this holder for the Wera 7400 torque wrench screwdriver. There are two separate models: Model 7440 with a torque range of 0.3-1.2 Nm Model 7441 with a torque range of 1.2-3.0 Nm You can find all the other holders and rails here .
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSteveW91
Wera Hex Holder for Giantz Pegboard
Remixed this to work with my giantz pegboard
- Pobrania
- 22
- Polubienia
- 6
- Ocena
- 5
P
PrintablesTomaae
Multiboard Wera 825/1 Holder
Holder for Wera 825/1 screwdriver with multiboard push-fit connection
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 5
P
PrintablesAlvomane
Ergonomic Twirler for the Hazet 810R or Inbus Flow 73424 Bit Ratchet Screwdriver like WERA 838 | Ergonomischer Zwirbler für den Hazet 810R oder Inbus Flow 73424 Bit Ratschen-Schraubendreher
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 5
P
PrintablesMAM3D
Wera Kraftform Kompakt VDE Holder
Here is the holder for the insert carrier “Wera Kraftform Kompakt VDE" , which I also constructed. This carrier is freely customizable only the individual parts must be combined. The files are available as STEP and as 3mf. The holder has…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGreengiant912
Yet Another Tool Holder for Wera Drivers and Flush cutters
A Tool holder to hold Wera Precision drivers, along with flush cutters and needle nose pilers. Printed with PETG. 10-15% infill. Printed 0.20mm layer height. No supports needed. Also might want to rotate 180 degrees on the x-axis, so the…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTobias
Wera 813 gridfinity holder
This gridfinity bin is designed to hold a Wera 813 bitholding screwdriver in the least amount of space and still be stackable: 2x1 with 4 height units. It is placed slightly of center to allow your finger to slip below it and lift up or…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDelta
Wera Kraftform Kompakt 62, 33 pieces holder - perforated panel (10x10mm)
Tool holder for Wera Kraftform Kompakt 62 with 33 pieces. https://products.wera.de/en/kraftform_kompakt_kraftform_kompakt_without_ratchet_functionality_kraftform_kompakt_60_62_kk_62.html.html (No. 05059297001) This version is for…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
Printablesn3kx
Wera scredriver box
Info: This is box for wera screwdriver from Aliexpress. Screwdriver came only within plastick bag so I made this box to hold it. Box have some holes for handle to protrude so box itself doesnt have to be so big. Box can carry handle of…
- Pobrania
- 16
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLudo B
Riolering verloop van 32mm naar 14.2mm. Sewerage reduction from 32mm to 14.2mm. + 50mm-14.2mm
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJoona
Gridfinity Wera bit-set kraftform kompakt
Gridfinity 1x3 bin for the a wera screwdriver.
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
Printablesksuszka
Wera Screwdriver Holder
This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…
- Pobrania
- 1909
- Polubienia
- 437
- Ocena
- 4,87
P
Printablesdaclasen
Skadis Holder for Wera Kraftform Micro Screwdriver
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
- Pobrania
- 1759
- Polubienia
- 407
- Ocena
- 4,9
P
PrintablesMany24
IKEA Skadis - Hex key holder / Držák na inbusy Wera
Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…
- Pobrania
- 1468
- Polubienia
- 384
- Ocena
- 4,92
P
PrintablesJeremy White
Gridfinity Wera Screwdriver Tray
This was to hold a set of 12 Wera stainless screwdrivers. The tools were a gift but they look like this set available on Amazon or at Sears.
- Pobrania
- 1204
- Polubienia
- 203
- Ocena
- 5
P
Printablesnickd
Gridfinity Wera Hex Organiser
Remix of Barebaric's Wera Hex organiser, expanded to 6x3 for easier picking up, and now stackable.
- Pobrania
- 1159
- Polubienia
- 215
- Ocena
- 4,75
P
PrintablesBenBreaksThings
Gridfinity Wera Hex Wrench Organizer; no magnets
Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.
- Pobrania
- 1080
- Polubienia
- 263
- Ocena
- 4,17
P
Printablesjcq
Ikea Skadis Wera keys magnetic mount
This is a magnetic mount for the Ikea Skadis Pegboard to mount allen keys. What do you need? 12x magnet round 6x3mm 6x magnet round 4x2mm (superglue) I printed this in ABS with supports for the mounts on the back. The mounts on the back…
- Pobrania
- 961
- Polubienia
- 212
- Ocena
- 4,7
P
Printablesmaxelman
Wera Tool Check Plus Rugged Box
The box consists of a customizable lid and base optimized for the Wera Tool Check Plus. It is closed with 2 clips and uses 6x 30mm M3 bolts. Print gasket in TPU The top inlay file can be edited to hold other tools. Also includes TPU Seal:…
- Pobrania
- 851
- Polubienia
- 210
- Ocena
- 4,92
P
Printablesender341
Gridfinity Wera Hex+ Metric Set holder
This is done with a half size grid, it's compatible with a normal gridfinity grid but you can place it at half offsets, and the model itself is sized equivalent to 5.5x6 grid. Heavily inspired by…
- Pobrania
- 840
- Polubienia
- 133
- Ocena
- 5
P
PrintablesLoki
HSW - Wera Hex Plus - Allen key holder
Holder for Wera Hex Plus allen Key for the Honeycomb Storage Wall
- Pobrania
- 814
- Polubienia
- 129
- Ocena
- 4,7
P
Printablesnmattia
Wera Hex-Plus Skadis mount
This is a skadis mount for Wera's Hex-Plus kit. Print-in-place, with supports. The mount just clips into the skadis board, and the Hex-Plus kit can be slid in. If you like this model, check out SKÅPA for generating custom parts for SKÅDIS…
- Pobrania
- 769
- Polubienia
- 116
- Ocena
- 4,75
P
PrintablesRWMH
Gridfinity Wera screwdriver holder
Holds 12 Wera Kraftform Micro screwdrivers, holes are offset so the head details are visible Fits into a 1x3 Gridfinity frame UPDATED - slightly enlarged holes and added some chamfers to make the insertion a bit smoother Addition - Fusion…
- Pobrania
- 761
- Polubienia
- 94
- Ocena
- 4,5
P
PrintablesPoly_Optimize
Skadis Wera Tool-Check PLUS
Introducing the Ikea Skadis pegboard hook made for the new Wera Tool-Check PLUS. Designed with precision, this hook perfectly complements the Wera Tool-Check model that lacks a back bracket for the belt, ensuring a secure and snug fit.…
- Pobrania
- 717
- Polubienia
- 111
- Ocena
- 4,8
P
PrintablesRESTLESS DESIGN
Wera Hex Key Set Holder
There are two versions of this model: one with size indicators for the hex keys and one without these indicators. Both versions have 2 countersunk holes for screw mounting it. You might need to use some support material, depending on how…
- Pobrania
- 706
- Polubienia
- 91
- Ocena
- 4
P
PrintablesLBR Engineering
Wera screwdriver Wallmount
Available Options How to Print Prusa Profile: 0.15mm Quality Other Settings: No support For usage with Wera Kraftform Micro screwdrivers Mounting The Model utilizes 3mm Mounting holes with a 2mm chamfer for screws with a maximum head…
- Pobrania
- 672
- Polubienia
- 134
- Ocena
- 5
P
PrintablesMichel
Wera screwdriver bracket / organizer
Bracket to store my Wera screwdriver collection in a tidy secure way. The bracket slotes accommandates the usal Wera blade diameters (8mm, 6mm, 4mm & 3.5mm), see attached figures.
- Pobrania
- 664
- Polubienia
- 79
- Ocena
- 4,86
P
PrintablesTJDesign
SKADIS WERA SCREWDRIVER MOUNTS
WERA Screwdriver mount for (IKEA) SKADIS peg board Keep your Wera screwdrivers tidy on an IKEA SKÅDIS pegboard – every driver gets its own snug cradle. ✅ 5 sizes – fits the WERA Kraftform Big Pack 300 (PH / PZ / slotted) ✅ Size 04 for…
- Pobrania
- 636
- Polubienia
- 115
- Ocena
- 4,94
P
PrintablesBarrie Vermazen
Adapter for Wera wisselklingset 9mm to regular hexbit
Adapter for Wera wisselklingset 9mm to regular hexbit. This way you can use standard hexbits in your toolset. Fit is thight, no detent or interlocking parts
- Pobrania
- 621
- Polubienia
- 88
- Ocena
- 4,83
P
PrintablesBASt
Ikea Skadis WERA Hex set holder
Used the Hookset of CSD_Salzbburg to smash up an IKEA Skadis version of MD81544's Wera Allen (Hex) Key holder. Cura says it's not watertight, but it prints perfectly. Print standing up for better strength and supports-free print Hookset…
- Pobrania
- 602
- Polubienia
- 114
- Ocena
- 4,69
P
PrintablesGiovanni
Gridfinity Wera Micro Screwdriver Tray
A stackable tray for 9 Wera "Kraftform Micro" screwdrivers.
- Pobrania
- 589
- Polubienia
- 107
- Ocena
- 5
P
Printablescodysechelski
Gridfinity Wera 818/4/1 Screwdriver Holder
Important: This fits the Wera 818/4/1. Wera makes several models that look similar but have slightly different geometry. Please check the model of your screwdriver before you print. The fit should be snug, but not too tight. Slightly more…
- Pobrania
- 543
- Polubienia
- 103
- Ocena
- 4,6
P
PrintablesStaubi
Wera Kraftform mit Shimano HollowTech Tool (TL-FC16)
Wera Kraftform mit Shimano HollowTech Tool (TL-FC16) Entdecken Sie die innovative Lösung für das (De-)Montieren der Kunststoffmutter an HollowTech-Kurbeln - die perfekte Kombination aus dem Shimano TL-FC16 Tool und dem Wera Kraftform…
- Pobrania
- 534
- Polubienia
- 72
- Ocena
- 5
P
Printablesdemek
Wera Kraftform Micro Stand
Minimal space consuming stand for set of Wera Kraftform Micro screwdrivers.Almost any screwdriver from Kraftform Micro series should fit. Model is ready for print, no need for rotating. No supports. I printed it with 0,2mm layer height.…
- Pobrania
- 526
- Polubienia
- 136
- Ocena
- 4,95
P
PrintablesOG_3D
Schraubendreher Tischhalterung (Wera) / Screwdriver table holder
Schraubendreher Tischhalterung passend für eine Wera Big Box.
- Pobrania
- 520
- Polubienia
- 43
- Ocena
- 5
P
PrintablesPablo Fernandez
Wera Kraftform Micro Gridfinity Holder (half pitch, fully stackable, very compact)
I made this holder for the Wera Kraftform Micro screwdrivers. I put a lot of emphases on compactness, each holding 7 screw drivers. There are many similar holders, but I wanted it to be half pitch and high density. I tried making it 3…
- Pobrania
- 512
- Polubienia
- 102
- Ocena
- 4,8
P
Printables3D-drukken
Gridfinity holder for Wera Hex Plus L key set
As I couldn't find a bin for the Wera Hex Plus set I have, I made my own. The bin itself is a little on the short side, so the set wobbles a bit, but it does stay in place. It does not move too bad.
- Pobrania
- 490
- Polubienia
- 78
- Ocena
- 5
P
PrintablesPurchenZuPoden
IKEA SKÅDIS TOP MOUNT FOR WERA SCREW DRIVER
Because the space on my Ikea Skadis was limited I designed a screwdriver mount for my Wera Kraftform XXL set which can be clamped onto the top edge of the pegboard. STEP-Files included Print Settings Printer: Hypercube Rafts: No Supports:…
- Pobrania
- 488
- Polubienia
- 135
- Ocena
- 5
P
Printables3DPrintsBF
Wera Hex Keys Mount for Honeycomb storage wall
This is a remix of the wera hex key mount for Ikea Skadis adjusted for usage with the Honeycomb Storage wall. 2 inserts M3 are needed along with M3 screws and nuts. 12x magnets round 6x3mm 6x magnets round 4x2mm
- Pobrania
- 485
- Polubienia
- 133
- Ocena
- 5
P
PrintablesAustin H.
Multiboard Wera Allen Key Set Holder
Mount your beautiful and precise Wera Hex Key Set to your Multiboard . Put them in easy reach and on display for all to see. Remixed this design from Jakob . Check out his makes, some great stuff for those using the Honeycomb walls.…
- Pobrania
- 484
- Polubienia
- 49
- Ocena
- 4,67
P
PrintablesJohn Mars
Gridfinity Wera Hex Plus L-key Trays (Metric & Imperial)
This set includes two storage trays specifically designed for Wera Hex Plus L-keys, accommodating both Metric and Imperial sizes. These trays help keep your tools organized and easily accessible. Features: Custom Fit : Each slot is…
- Pobrania
- 477
- Polubienia
- 56
- Ocena
- 5
P
PrintablesNoah
Wera Kraftform micro Holder
Screwdriver Holder for Wera Kraftform Micro series Big Pack Print Settings Printer: Cetus mk2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: Das Filament PLA Black Category: Tool Holders & Boxes
- Pobrania
- 445
- Polubienia
- 129
- Ocena
- 5
P
PrintablesCraftByte Engineering
Gridfinity Wera Metric 950 SPKL/9 SM HF
Gridfinity model for the Metric version of the Wera allen keys.
- Pobrania
- 419
- Polubienia
- 68
- Ocena
- 5
P
PrintablesToch419
Gridfinity Wera Tool-Check PLUS
This is a Gridfinity module based on the system released by Zack Friedman for storing a Wera Tool-Check PLUS. It is a 1x5 module and there are two uploaded versions. I have made a 7/6 or 7U high bin for my use case but have uploaded a…
- Pobrania
- 409
- Polubienia
- 78
- Ocena
- 5
P
Printables3DPrintsBF
Wera Screwdriver mount for Honeycomb Storage wall
This is a remix of the wera screwdriver mount adjusted for usage with the Honeycomb Storage wall.
- Pobrania
- 387
- Polubienia
- 81
- Ocena
- 5
P
PrintablesMrStolarsky
Gridfinity + Wera Joker 8-19mm Combination Wrenches
I am slowly moving into my new toolbox. This model organizes my wrenches from Wera in a neat way. Last photo shows how much grid it actually takes – 6 by 5. Like and post makes if you print this! Thank you. Printing I printed with…
- Pobrania
- 378
- Polubienia
- 75
- Ocena
- 4,67
P
PrintablesIdea2Item
Wera Joker 6000 Series Ring Ratchet Wrench Holder 8-19mm 11 piece holder Works for other brands too.
To hang a standard 8-19mm 11-piece wrench set to a wall. It fits all brands, bit it's designed for a wera joker 6000 ratchet ring set If you want the change direction small to big, left to right just mirror both models. They have a small…
- Pobrania
- 357
- Polubienia
- 133
- Ocena
- 0
P
PrintablesRobul
Multiboard Wera Kraftform Plus – Serie 900 Big Pack Holder
Holder for Wera Kraftform Plus – Series 900 Big Pack for the Multiboard The holder for Wera Kraftform screwdrivers (900 series) is designed for use with the Multiconnect System by @DavidD for Multiboard. Both holders are intended for the…
- Pobrania
- 355
- Polubienia
- 23
- Ocena
- 5
P
Printablesgrumpy_scrambler
Wall Mount for WERA Allen Key HexPlus
A wall mount for the Allen Key Set HexPlus by WERA. Just snap in and lock the original clip. Print instructions Category: Hobby Summary A wall mount for the Allen Key Set HexPlus by WERA. Just snap in and lock the original clip. Print…
- Pobrania
- 346
- Polubienia
- 75
- Ocena
- 4,5
P
PrintablesDBT85
Wera Kraftform Micro Multiboard mount
Multiboard mount for Wera Kraftform Micro screw/hex/torx drivers
- Pobrania
- 335
- Polubienia
- 56
- Ocena
- 5
P
Printablesdaclasen
Skadis Top Mount for Wera Screwdrivers (MMU/AMS/multicolor)
This is a Remix of PurchenZuPoden s ingenious Skadis Top Mount for Wera Screw Drivers . As I really love the Idea and Design while being completely unable to precisely paint the original Holders Labels I made all of them MMU/AMS…
- Pobrania
- 322
- Polubienia
- 130
- Ocena
- 5
P
PrintablesPlastik Labs
IKEA SKADIS Wera Hex Keys Holder
PRINTING INSTRUCTIONS Orientation: STL is oriented correctly Support: Support is required under the 3 top hooks Infill: 40% cubic infill for stiffness Layer height: 0.2 Print time: About 1h30 print (on a Voron), 31.15g of material
- Pobrania
- 315
- Polubienia
- 39
- Ocena
- 5
P
PrintablesClemi
Wera 967/9 Torx Allen keys magnetic mount Ikea Skadis t-nuts
Simple magnetic holder for Wera 967/9 Torx Allen keys. Magnets work great as press-fit for me. The original Wera keys magnetic mount for wera 950/9 hex keys from jcq was too big for the smaller torx 967/9 allen keys, so i created this…
- Pobrania
- 300
- Polubienia
- 100
- Ocena
- 5
P
PrintablesCmarlow
Wera hex keys holder
This is a remake from DrDflos model: https://thangs.com/designer/DrDflo/3d-model/Wera-Hex-Keys-Holder-for-Pegboard-37701 Should work with normal allen keys aswell since they should be thinner without the handle. I attached a drawing with…
- Pobrania
- 293
- Polubienia
- 34
- Ocena
- 5
P
PrintablesIainY
Replacement clip for Wera Tool-Check PLUS
The clear plastic clip broke on my Wera Tool-Check PLUS (one of my favourite tools!) so I designed and printed a replacement part.
- Pobrania
- 287
- Polubienia
- 27
- Ocena
- 5
P
PrintablesJonas Lang
Wera Zyklop 1/4" Socket Organizer Storage Gridfinity
Compact Storage for Wera 1/4" Nuts from Zyklop sets. Managed to squeeze it into 2x1 Gridfinity
- Pobrania
- 287
- Polubienia
- 58
- Ocena
- 5
P
PrintablesTeam Pflaum
Wera Screwdriver Wall Mount
Hi zusammen, anbei eine einfache Wandhalterung für Wera 18 Schraubendreher: Wera 935 A Wera 932 A Wera 918 SPZ Wera 917 SPH Wera 977 Nennweite: 5 Plätze für 27, 4 Plätze 23 und ein Platz 19 Gedruckt mit PETG HF, ohne Support oder…
- Pobrania
- 286
- Polubienia
- 55
- Ocena
- 5
P
Printableskerngebiet
Wera Hex-Plus and Torx Alan Keys Holder
Simple wall-mountable holder for Wera Hex-Plus * and Torx Alan Keys * or L-Keys. Easily to print without any supports. * = Amazon Affiliate Links
- Pobrania
- 286
- Polubienia
- 40
- Ocena
- 5
P
Printablesdaclasen
Skadis Holder for Wera 817 Kraftform Kompakt Screwdriver/Bitholder
This is a Skadis Holder for the Wera 817 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the ikea skadis wera mini grips holder from…
- Pobrania
- 284
- Polubienia
- 35
- Ocena
- 5
P
Printablesitz_niklas
Wera Kraftform Micro holder
Wera Kraftform Micro holder Adaptable desktop holder for Wera Kraftfrom Micro. The Example shown in the pictures fits the Big Pack set with 25pcs and still has some extra space for additional ones. The parts of the holder can be screwed…
- Pobrania
- 283
- Polubienia
- 85
- Ocena
- 5
P
PrintablesBrasso
Wera Micro Kraftform Gridfinity holder
5 x 5 x 4 Gridfinity Wera Micro Kraftworm Holder
- Pobrania
- 277
- Polubienia
- 49
- Ocena
- 5
P
Printablesreibuehl
Wera Tool Check Plus Rugged Box Inlay
Inlay for the lid of the Wera Tool Check Plus Rugged Box that holds a Knipex Cobra Water Pump Pliers (87 03 125) and a Knipex Mini-Pliers Wrench (86 03 125), the 152mm bit holder of the Tool Rebels Edition of the Tool Check Plus and 8…
- Pobrania
- 275
- Polubienia
- 110
- Ocena
- 4,67
P
Printablesdaclasen
Skadis Holder for various Wera Screwdriver/Bitholder
This is a Skadis Holder for various Wera Screwdrivers/Bitholders. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . You can mount e.g. the following Drivers from the Kraftform Kompakt Series but others…
- Pobrania
- 273
- Polubienia
- 44
- Ocena
- 0
P
Printablesfreejstn
Wera Tool Check Plus Skadis Mount
Overview I have the newer version of Wera's Tool Check Plus , which doesn't have the belt loop, and I recently put my IKEA Skådis on my Raskog Cart so I can move my tools around with my other stuff. I wanted to have a way to mount my Tool…
- Pobrania
- 263
- Polubienia
- 47
- Ocena
- 4,5
P
PrintablesLyra
Schraubendreher Halterung (Wera)
Schraubendreher Wandhalterung mit 11 Plätzen für Schraubendreher. Es passen auch die Wera Schraubendreher mit Sechskant unterm Griff. Befestigung an der Wand mit 3x20 Schrauben Category: Tool Holders & Boxes
- Pobrania
- 258
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTheHobbitGamer
Wera Hex-Plus wall mount
I used two screws with a 7 mm pan head and 3.5 mm tread diameter. The maximum diameter of the screw head is 8 mm.
- Pobrania
- 258
- Polubienia
- 35
- Ocena
- 5
P
Printablesksuszka
Wera Tool-Check Plus (without belt clip) wall holder
This is a simple holder for Wera Tool-Check Plus set, specifically for the version without a belt clip. Apparently, there are at least two different versions of Wera Tool-Check Plus set. Both have the same bit content, but the plastic bit…
- Pobrania
- 255
- Polubienia
- 36
- Ocena
- 4,67
P
Printablesw00h
Wera Joker Wrench Wall Holder
I wanted a compact wall mount for the Wera Joker wrench set (with 11 wrenches) and found Gluon45's model on thingiverse. The only modification I made was to add some holes to screw it to a wall – even if it does look a bit sketchy, it…
- Pobrania
- 249
- Polubienia
- 34
- Ocena
- 5
P
PrintablesIdea2Item
Wera Kratform Screwdriver Holder\Organizer Wall Mount
Organize your workspace with this custom-designed 3D printed holder for Wera screwdrivers! Created to accommodate a variety of screwdriver types and sizes, this practical storage solution includes blocks for: PH screwdriver set: PH0, PH1,…
- Pobrania
- 249
- Polubienia
- 41
- Ocena
- 5
P
Printablesweak
Gridfinity Wera Kraftform Micro holder (small)
This is a remix of @Skrivkunnig_276816 's holder for Wera Kraftform Micro screwdrivers. It has room for 5 screwdrivers in a 2x5x4 Gridfinity bin. I wanted a smaller version with room for 5 screwdrivers, just the ones I need for printer…
- Pobrania
- 238
- Polubienia
- 42
- Ocena
- 5
P
Printableskroberts
Wera Hex-Plus Honeycomb Wall Mount
Print Settings Printer: Ender 3 S1 Pro Rafts: No Supports: Yes. Tree Resolution: 0.2 Infill: 20% Filament: Hatchbox PETG Red Category: Tool Holders & Boxes
- Pobrania
- 233
- Polubienia
- 50
- Ocena
- 5
P
PrintablesRoboMagus
Wera Hex-Plus Pegboard Mount
2 Simple hooks for a pegboard to store a set of Wera Hex-plus allan keys. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height.
- Pobrania
- 230
- Polubienia
- 39
- Ocena
- 5
P
Printablestelefaksi
Wera Kraftform XXL 2 screwdriver set gridfinity
I included model files as pre cut to 2 parts for smaller printers and as a single models for printers capable printing 4x6 sized gridfinity bins.
- Pobrania
- 228
- Polubienia
- 28
- Ocena
- 0
P
PrintablesParasitKegel
Gridfinity Wera Torx L-Wrenches Bin
Compatibility This bin is compatible with the Wera Torx L-wrenches set (TX8 to TX40) . General It is 2 x 4 x 3 Gridfinity units in size which corresponds to a size of 84 x 168 x 21 mm + rim heigth. The height was choosen to match the…
- Pobrania
- 224
- Polubienia
- 48
- Ocena
- 5
P
PrintablesPlanBee
Wera Gridfinity Screwdriver Rack 1x2
Screwdriver rack for up to 8 Wera micro screwdrivers. Per original maker: When printing the legs, rotate them so the flat part is facing the bed. e.g. 45° on Z axis, 90° on Y axis. No supports are needed. There are no tolerances built…
- Pobrania
- 223
- Polubienia
- 26
- Ocena
- 4,4
P
Printablescmh
Holder for Wera 1.5-8mm hex key set in 20mm foam
As seen on Instagram . Holder for a Wera hex key set, (Wera part number 05073593001) holding 1.5-8mm hex keys. Designed for a bike mechanic travel toolbox where the 10mm hex wrench is never used, so I left it out. (if you really wanted…
- Pobrania
- 222
- Polubienia
- 36
- Ocena
- 5
P
Printablescolin725
Pegboard Wera Hex Key Set
This is remix of the magnetic mount for the Ikea Skadis Pegboard to mount allen keys using peg board. Sy's peglock works great for this use because it's secure, prints easily without supports, and doesn't have an issue with pegs breaking.…
- Pobrania
- 221
- Polubienia
- 24
- Ocena
- 5