Wera Tool-Check Plus (without belt clip) wall holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted holder for Wera Tool-Check Plus set without a belt clip.
- Ocena
- 4,667 / 5
- Polubienia
- 36
- Pobrania
- 256
- Wydruki
- 3
- Wyświetlenia
- 2892
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a simple holder for Wera Tool-Check Plus set, specifically for the version without a belt clip. Apparently, there are at least two different versions of Wera Tool-Check Plus set. Both have the same bit content, but the plastic bit holder is different. One have a little latch in the right top corner and a belt clip at the back. The other one doesn't have the latch or the belt clip.
Most wall mounted holder designs out there are for the belt clip version. As I have the other version I needed to design my own holder.
There is the 90mm distance between holes in provided STL files. If you need other spacing drop me a message and I will see what I can do, or use attached source file to change it yourself.