988 models
This is my take on designing a perfect screwdriver holder ;). I went through a lot of designs already present on thingiverse and borrowed some ideas from a few, mainly 2918462 and 3671735 . They both are excellent designs however they…
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…
This was to hold a set of 12 Wera stainless screwdrivers. The tools were a gift but they look like this set available on Amazon or at Sears.
Remix of Barebaric's Wera Hex organiser, expanded to 6x3 for easier picking up, and now stackable.
Within the gridfinity system there are those that like having magnets and those that do not. Remixed because I remove magnets from all models prior to printing them for myself and figure someone else out there may be of the same ilk.
This is a magnetic mount for the Ikea Skadis Pegboard to mount allen keys. What do you need? 12x magnet round 6x3mm 6x magnet round 4x2mm (superglue) I printed this in ABS with supports for the mounts on the back. The mounts on the back…
The box consists of a customizable lid and base optimized for the Wera Tool Check Plus. It is closed with 2 clips and uses 6x 30mm M3 bolts. Print gasket in TPU The top inlay file can be edited to hold other tools. Also includes TPU Seal:…
This is done with a half size grid, it's compatible with a normal gridfinity grid but you can place it at half offsets, and the model itself is sized equivalent to 5.5x6 grid. Heavily inspired by…
Holder for Wera Hex Plus allen Key for the Honeycomb Storage Wall
This is a skadis mount for Wera's Hex-Plus kit. Print-in-place, with supports. The mount just clips into the skadis board, and the Hex-Plus kit can be slid in. If you like this model, check out SKÅPA for generating custom parts for SKÅDIS…
Holds 12 Wera Kraftform Micro screwdrivers, holes are offset so the head details are visible Fits into a 1x3 Gridfinity frame UPDATED - slightly enlarged holes and added some chamfers to make the insertion a bit smoother Addition - Fusion…
Introducing the Ikea Skadis pegboard hook made for the new Wera Tool-Check PLUS. Designed with precision, this hook perfectly complements the Wera Tool-Check model that lacks a back bracket for the belt, ensuring a secure and snug fit.…
There are two versions of this model: one with size indicators for the hex keys and one without these indicators. Both versions have 2 countersunk holes for screw mounting it. You might need to use some support material, depending on how…
Available Options How to Print Prusa Profile: 0.15mm Quality Other Settings: No support For usage with Wera Kraftform Micro screwdrivers Mounting The Model utilizes 3mm Mounting holes with a 2mm chamfer for screws with a maximum head…
Bracket to store my Wera screwdriver collection in a tidy secure way. The bracket slotes accommandates the usal Wera blade diameters (8mm, 6mm, 4mm & 3.5mm), see attached figures.
WERA Screwdriver mount for (IKEA) SKADIS peg board Keep your Wera screwdrivers tidy on an IKEA SKÅDIS pegboard – every driver gets its own snug cradle. ✅ 5 sizes – fits the WERA Kraftform Big Pack 300 (PH / PZ / slotted) ✅ Size 04 for…
Adapter for Wera wisselklingset 9mm to regular hexbit. This way you can use standard hexbits in your toolset. Fit is thight, no detent or interlocking parts
Used the Hookset of CSD_Salzbburg to smash up an IKEA Skadis version of MD81544's Wera Allen (Hex) Key holder. Cura says it's not watertight, but it prints perfectly. Print standing up for better strength and supports-free print Hookset…
A stackable tray for 9 Wera "Kraftform Micro" screwdrivers.
I wanted a holder for my Wera screwdrivers where I can easily grab a screw driver but do not need much space on the Skadis board - and I made them. I tested them with various other screw drivers, so it should be usable with almost any…
I converted the screwdriver hangers so that they could be hung on the Honeycomb storage wall. Print with 3-4 circuits and 30% infill. The supports are necessary, but the residue will be invisible. Model orientation: vertical, with the…
Important: This fits the Wera 818/4/1. Wera makes several models that look similar but have slightly different geometry. Please check the model of your screwdriver before you print. The fit should be snug, but not too tight. Slightly more…
Wera Kraftform mit Shimano HollowTech Tool (TL-FC16) Entdecken Sie die innovative Lösung für das (De-)Montieren der Kunststoffmutter an HollowTech-Kurbeln - die perfekte Kombination aus dem Shimano TL-FC16 Tool und dem Wera Kraftform…
Hello together, here you can see my idea of a holder for the Wera Kraftform Micro screwdrivers ;-) The lower hexagon is there to keep the screwdrivers aligned and the upper circular shaped arms hold them in place. Would be nice if you…
Minimal space consuming stand for set of Wera Kraftform Micro screwdrivers.Almost any screwdriver from Kraftform Micro series should fit. Model is ready for print, no need for rotating. No supports. I printed it with 0,2mm layer height.…
Schraubendreher Tischhalterung passend für eine Wera Big Box.
Simple holder for Wera electronic screwdrivers.
I made this holder for the Wera Kraftform Micro screwdrivers. I put a lot of emphases on compactness, each holding 7 screw drivers. There are many similar holders, but I wanted it to be half pitch and high density. I tried making it 3…
These are Gridfinity holders for Wera screwdrivers , made modular so you can print them on a smaller printer (230x230) by putting the module on the plate diagonally. You can also choose some modules according to which screwdrivers you…
As I couldn't find a bin for the Wera Hex Plus set I have, I made my own. The bin itself is a little on the short side, so the set wobbles a bit, but it does stay in place. It does not move too bad.
Because the space on my Ikea Skadis was limited I designed a screwdriver mount for my Wera Kraftform XXL set which can be clamped onto the top edge of the pegboard. STEP-Files included Print Settings Printer: Hypercube Rafts: No Supports:…
This is a remix of the wera hex key mount for Ikea Skadis adjusted for usage with the Honeycomb Storage wall. 2 inserts M3 are needed along with M3 screws and nuts. 12x magnets round 6x3mm 6x magnets round 4x2mm
Mount your beautiful and precise Wera Hex Key Set to your Multiboard . Put them in easy reach and on display for all to see. Remixed this design from Jakob . Check out his makes, some great stuff for those using the Honeycomb walls.…
This set includes two storage trays specifically designed for Wera Hex Plus L-keys, accommodating both Metric and Imperial sizes. These trays help keep your tools organized and easily accessible. Features: Custom Fit : Each slot is…
This is a simple holder for your Wera Tool-Check. There is a version for screwing to your wall and one each for IKEA Skadis and Wall Control pegboards available. Prints well in the orientation as it comes from the STL file using PLA with…
Two holders for Wera bit screwdrivers. One for the big ones (part number of mine 05051005001) and one for the mini (part number of mine 05051274001).
Screwdriver Holder for Wera Kraftform Micro series Big Pack Print Settings Printer: Cetus mk2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: Das Filament PLA Black Category: Tool Holders & Boxes
Only a small remix with space for 8 screwdrivers
Skadis add on using the universal hooks from : https://www.thingiverse.com/thing:2853261 holding Wera screwdriver set easy print Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
Gridfinity model for the Metric version of the Wera allen keys.
This is a Gridfinity module based on the system released by Zack Friedman for storing a Wera Tool-Check PLUS. It is a 1x5 module and there are two uploaded versions. I have made a 7/6 or 7U high bin for my use case but have uploaded a…
This is another remix of the Wera Kraftform Micro Screwdrivers. The photos show an older design, which was not stackable, which was really dumb. The uploaded model is a updated version and is stackable .
Remixed this great Wera holder for the Honeycomb Storage Wall.
This is a remix of the wera screwdriver mount adjusted for usage with the Honeycomb Storage wall.
I am slowly moving into my new toolbox. This model organizes my wrenches from Wera in a neat way. Last photo shows how much grid it actually takes – 6 by 5. Like and post makes if you print this! Thank you. Printing I printed with…
Holder for the Wera Zyklop 8000 A 1/4-inch Drive Ratchet in gridfinity style Printed in PLA on my prusa mini but sure PETG work great as well, no support needed
I wanted a stand for my Gamecube controllers which matched some of the ones I'd printed / designed for 8BitDo controllers, so designed this. I took inspiration from the remixes and attempted to use some of the sizings, but after many…
To prevent warping, I used a skirt and limited cooling to a maximum of 20%. Nozzle: 0.4 mm Layer Height: 0.25 mm Infill: 15 % Skirt: Yes Supports: None Material: PETG Just in case you wonder: I mirrored the model before printing, that is…
To hang a standard 8-19mm 11-piece wrench set to a wall. It fits all brands, bit it's designed for a wera joker 6000 ratchet ring set If you want the change direction small to big, left to right just mirror both models. They have a small…
Holder for Wera Kraftform Plus – Series 900 Big Pack for the Multiboard The holder for Wera Kraftform screwdrivers (900 series) is designed for use with the Multiconnect System by @DavidD for Multiboard. Both holders are intended for the…
The holder comes in four variants, from 3 to 6 screwdrivers. It can be hang up by screwing it to a surface with the two screw holes or also glued or taped. PLA will do fine.
A wall mount for the Allen Key Set HexPlus by WERA. Just snap in and lock the original clip. Print instructions Category: Hobby Summary A wall mount for the Allen Key Set HexPlus by WERA. Just snap in and lock the original clip. Print…
Multiboard mount for Wera Kraftform Micro screw/hex/torx drivers
Crafted with precision using a 0.25 mm nozzle, these logos showcase meticulous attention to detail and quality. Whether you opt to secure them with glue or affix a magnetic strip for convenient display, these logos add a touch of…
This is a Remix of PurchenZuPoden s ingenious Skadis Top Mount for Wera Screw Drivers . As I really love the Idea and Design while being completely unable to precisely paint the original Holders Labels I made all of them MMU/AMS…
PRINTING INSTRUCTIONS Orientation: STL is oriented correctly Support: Support is required under the 3 top hooks Infill: 40% cubic infill for stiffness Layer height: 0.2 Print time: About 1h30 print (on a Voron), 31.15g of material
I have made this using the idea from Bob, but redrawn in FreeCAD. I've also decided not to have the model “spring” to grip the screwdriver shaft (The wedging action was damaging the screwdriver handle). So now the screwdrivers just sit…
Simple magnetic holder for Wera 967/9 Torx Allen keys. Magnets work great as press-fit for me. The original Wera keys magnetic mount for wera 950/9 hex keys from jcq was too big for the smaller torx 967/9 allen keys, so i created this…
This is a remake from DrDflos model: https://thangs.com/designer/DrDflo/3d-model/Wera-Hex-Keys-Holder-for-Pegboard-37701 Should work with normal allen keys aswell since they should be thinner without the handle. I attached a drawing with…
This is a 1x3 Gridfinity holder for 12 Wera Kraftform Micro screwdrivers. It’s a modified version of RWMH’s model where I’ve made the following changes: The magnet holes on the bottom have been updated to the type that can easily print…
The clear plastic clip broke on my Wera Tool-Check PLUS (one of my favourite tools!) so I designed and printed a replacement part.
Compact Storage for Wera 1/4" Nuts from Zyklop sets. Managed to squeeze it into 2x1 Gridfinity
Hi zusammen, anbei eine einfache Wandhalterung für Wera 18 Schraubendreher: Wera 935 A Wera 932 A Wera 918 SPZ Wera 917 SPH Wera 977 Nennweite: 5 Plätze für 27, 4 Plätze 23 und ein Platz 19 Gedruckt mit PETG HF, ohne Support oder…
Maybe my mounts are a little bit “overdoing” :-) , but the Wera Kraftform Screwdrivers are really good and expensive. That's why I wanted to give them a special mounting. If you want to print the labels in 2 colors, you've to set a…
Simple wall-mountable holder for Wera Hex-Plus * and Torx Alan Keys * or L-Keys. Easily to print without any supports. * = Amazon Affiliate Links
This is a Skadis Holder for the Wera 817 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the ikea skadis wera mini grips holder from…
Wera Kraftform Micro holder Adaptable desktop holder for Wera Kraftfrom Micro. The Example shown in the pictures fits the Big Pack set with 25pcs and still has some extra space for additional ones. The parts of the holder can be screwed…
5 x 5 x 4 Gridfinity Wera Micro Kraftworm Holder
Inlay for the lid of the Wera Tool Check Plus Rugged Box that holds a Knipex Cobra Water Pump Pliers (87 03 125) and a Knipex Mini-Pliers Wrench (86 03 125), the 152mm bit holder of the Tool Rebels Edition of the Tool Check Plus and 8…
This is a Skadis Holder for various Wera Screwdrivers/Bitholders. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . You can mount e.g. the following Drivers from the Kraftform Kompakt Series but others…
As everyone knows, Wera Kraftform Screwdrivers are of their own kind. Good grip, precise manufacturing, a joy to use. As I own the Big Pack 300 and use them a lot, I was looking for holders to mount them to my Skadis Pegboard. One day I…
Overview I have the newer version of Wera's Tool Check Plus , which doesn't have the belt loop, and I recently put my IKEA Skådis on my Raskog Cart so I can move my tools around with my other stuff. I wanted to have a way to mount my Tool…
Backplate with 2 countersunk holes for screw mounting included in the file. No Support was needed on my printer (Ultimaker 3).
This is a Skadis Holder for the Wera Kraftform Screwdriver (with 6 Slots). Material: PLA Infill: 20%
Schraubendreher Wandhalterung mit 11 Plätzen für Schraubendreher. Es passen auch die Wera Schraubendreher mit Sechskant unterm Griff. Befestigung an der Wand mit 3x20 Schrauben Category: Tool Holders & Boxes
I used two screws with a 7 mm pan head and 3.5 mm tread diameter. The maximum diameter of the screw head is 8 mm.
This is a simple holder for Wera Tool-Check Plus set, specifically for the version without a belt clip. Apparently, there are at least two different versions of Wera Tool-Check Plus set. Both have the same bit content, but the plastic bit…
Scadis pegboard holder for 8 screwdrivers from Wera Kraftform.
I can across the design of TJDesign and I liked it. Printed in two parts without supports, multiple sizes, holds secure and you don't have to lift it all the way up because of the cutout. But during the printing a came across the problem…
I wanted a compact wall mount for the Wera Joker wrench set (with 11 wrenches) and found Gluon45's model on thingiverse. The only modification I made was to add some holes to screw it to a wall – even if it does look a bit sketchy, it…
Organize your workspace with this custom-designed 3D printed holder for Wera screwdrivers! Created to accommodate a variety of screwdriver types and sizes, this practical storage solution includes blocks for: PH screwdriver set: PH0, PH1,…
Dies ist mein Design für einen Halter für das 7-teilige Wera VDE-Elektroschraubendreher Set. Als Filament habe ich Amazon Basic PLA verwendet. Zur Befestigung auf der Skadis-Platte habe ich die T-Clips von LineArcLine verwendet.…
This is a remix of @Skrivkunnig_276816 's holder for Wera Kraftform Micro screwdrivers. It has room for 5 screwdrivers in a 2x5x4 Gridfinity bin. I wanted a smaller version with room for 5 screwdrivers, just the ones I need for printer…
Holds 8 mini screwdrivers. Designed for the Wera ones but likely to fit many other small screwdrivers too. Holes are intentionally quite small, and can be drilled out if needed to accommodate larger drivers. Print without supports with…
Remix for Wera VDE Torx Screwdriver Holder (Wera 167 i)
Print Settings Printer: Ender 3 S1 Pro Rafts: No Supports: Yes. Tree Resolution: 0.2 Infill: 20% Filament: Hatchbox PETG Red Category: Tool Holders & Boxes
Remixed from the HSW variant, now comes the Skadis version to hold your set of WERA torx wrenches onto your existing (or soon to be) skadis wall! I have the pleasure of uploading this on behalf of the mad-lad maker, Fox, who designed…
2 Simple hooks for a pegboard to store a set of Wera Hex-plus allan keys. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height.
I got this nice Wera Torx tool set as a gift and really like the Wera Hex Holder from Kevman , so I decided, as a nice learning exercise, to recreate this for the Wera TORX set, as it has different dimensions. So at the origin the design…
I included model files as pre cut to 2 parts for smaller printers and as a single models for printers capable printing 4x6 sized gridfinity bins.
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
A tray to store the Wera screwdrivers in my Fasano tools cart. Wera, 335/350/355/6 Assortimento di giraviti Kraftform Plus Lasertip + rack, 6 pezzi I printed everything upside down and enabled the supports and the textured effect.
Compatibility This bin is compatible with the Wera Torx L-wrenches set (TX8 to TX40) . General It is 2 x 4 x 3 Gridfinity units in size which corresponds to a size of 84 x 168 x 21 mm + rim heigth. The height was choosen to match the…
Bottom part for other tools, top for 10 Wera screwdrivers
Screwdriver rack for up to 8 Wera micro screwdrivers. Per original maker: When printing the legs, rotate them so the flat part is facing the bed. e.g. 45° on Z axis, 90° on Y axis. No supports are needed. There are no tolerances built…
As seen on Instagram . Holder for a Wera hex key set, (Wera part number 05073593001) holding 1.5-8mm hex keys. Designed for a bike mechanic travel toolbox where the 10mm hex wrench is never used, so I left it out. (if you really wanted…
Remixed for 10 capacity and length reduced by 3 mm so it would fit on my circular bed. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Tool Holders & Boxes
This is remix of the magnetic mount for the Ikea Skadis Pegboard to mount allen keys using peg board. Sy's peglock works great for this use because it's secure, prints easily without supports, and doesn't have an issue with pegs breaking.…
I really liked John Mars ' model, but I found some of the smaller L keys weren't staying in the allotted spot when opening and closing the drawer I keep them in. So, as well as adding a lip to make them stackable, I made the recess' a…
