Raspberry Pi Zero 2W case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for RPi Zero. It can be mounted trough the bottom holes with M3 or M5 screws.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Raspberry Pi Zero case, which was designed to fit on the Ender 3's 40mm wide left hand side base extrusion next to the original electronics case to easily reach the printer's mainboard with a UART cable.
It can be mounted with M3 or M5 T slot nuts to any extrusion through the holes on the bottom part - or to any flat surface with 2-sided tape.
It has cutouts for the HDMI, USB, display and SD connectors and there is an extra cutout for any kind of cable (e.g. UART cable).
The model requires 4pcs of M2.5xD3.5xL5 heat set inserts for fixing the Pi itself (with M2.5x6 SHCS), and 4pcs of M3xD5xL4 inserts for fixing the top cover to the bottom (with M3x12 SHCS).