Ender 5 - Adjustable BL Touch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to fit Ender 5 BL Touch mount, works with the stock fan housing.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Easy to fit Ender 5 BL Touch mount, works with the stock fan housing.
E5_BLTouch_P1_v3.stl is required for all.
Pick between PT2_Adjust for a Z adjustable version and PT2_ZeroAdjust for a version designed to have the bottom of the BL touch housing (NOT THE PROBE) sitting 8mm above the base of the stock nozzle for easy alignment.
Mounts OUTSIDE the default fan housing, adjustable arm has spacing for a M3 bolt and recesses for BL touch bolts either for slot in (if your tollerences are good) or for a more robust solution heat fitting the nuts into the correct locations.
Overall tollerances on the fitting mechanism is 0.15mm but should be fine at 0.2mm as well.