Mini Putting Golf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fun tabletop golf set for procrastinating :)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I saw this model on Thangs but didn't want to pay for it, so I made one myself. The large piece is meant to go at the end of the table or desk. To make the actual golf club, stick a pencil in them. It is quite loose, so wrap just a tiny bit of tape around it, and it will stick better than before. I used average Ticonderoga pencils. for the golf balls, I used marbles that were 1.6 cm in diameter.
all credit goes to: https://www.thingiverse.com/thing:5872415, for the golf clubs.
print settings:
infill: tri-hexagon. 20%.
print speed: 60mms
walls: 3 walls. normal
filament: CR-PETG
(Creality official)
- Additional print settings would include no bottom layers and a print temp set to higher on the bottom layer. There was no need for PETG.