[2x REMIXED] Tevo Tarantula 3-Wheel X Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the "without spacers" version of https://www.thingiverse.com/thing:2628544The spacers came with tevo printer…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the "without spacers" version of https://www.thingiverse.com/thing:2628544
The spacers came with tevo printer is strong enough to handle preasure but printed ones are not. So i recommend using default spacers.
-You will need 4 pieces m4 30 screws + 4 pieces m4 nut for tensioner. -Because the original part is not designed well, drilling tensioner holes with 4mm drill bit is needed. -And you should use washers.
Warning- While mounting wheel on the tensioner you must use extra spring washer between screw head and wheel. Because default tevo wheel screw hits extrusion.
X idler and motor mount: https://www.thingiverse.com/thing:1580899
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
No
Resolution:
0.3
%30
Notes:
5 top-bottom layers + 5 wall line count with abs filament is recommended
Category: 3D Printer Parts