1 / 11
KNOBMI! Sovol SV06 ACE Y belt tensioning system with Knomi — zdjęcie 1
1 / 11

KNOBMI! Sovol SV06 ACE Y belt tensioning system with Knomi

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enhance your SV06 ACE with the KNOBMI, integrating the BTT Knomi V2 Display into the Y-belt tensioning system

Ocena
0 / 5
Polubienia
15
Pobrania
35
Wydruki
0
Wyświetlenia
1382
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

you can connect the knomi on any usb port from the motherboard just use the 5v and ground also the uart port can be used 

here is the motherboard diagram

 

 

Later Edit 28. November 2024

modified the Knob and the Knomi holder. made them a little bit smaller in some cases the bed was heating them 

 

This mod integrates the BigTreeTech Knomi V2 Display into the Y-axis belt tensioning system of the Sovol SV06 ACE 3D printer, combining functionality and aesthetics. The display is seamlessly housed within a custom-designed tensioning knob, ensuring easy access while maintaining precise belt adjustments.

Features:

  • Integrated Display: The BTT Knomi V2 Display is centrally positioned within the Y tensioning knob.
  • Secure Mounting: Includes a custom holder for securing the antenna and display frame to the printer.

Requirements:

Hardware:

Power: Connect the display to the motherboard using 5V and GND.

Print Settings:

  • Layer Height: 0.2mm
  • Infill: 15-20%, Gyroid pattern
  • Walls:
    • Pulley holder: 5 walls
    • Other components: 3 walls
  • Top/Bottom Layers: 5 each

Notes:

The provided STL files are pre-oriented and ready for printing. Follow the picture in the repository for antenna and holder placement guidance.

 

For the SV06 Plus use this model 

For the SV06  use this model 

Tagi