bambulab P1/X1 chamber heater - fast heating chamber heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made my own chamber heater for minimum wattage with best heating efficiency (maybe)
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 3198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm so busy now so i couldn't make detailed description
i'll update soon
The test results show that with an ambient temperature of 8°C, it took 16 minutes to raise the chamber's internal temperature to 60°C, achieved without using the AUX fan.
BOM (Bill of Materials)
M3 Insert Nut
- Outer Diameter (OD): 4.5mm
- Length: 4.5mm (Other lengths are acceptable)
- Quantity: 15 pcs
M3x35 Screws
- Purpose: For 8030 fan
- Quantity: 2 pcs
M3x5 Screws
- Purpose: For attaching the heater to the frame of P1/X1
- Quantity: 2 pcs
M3x5 Countersunk Screws
- Purpose: For rear cover
- Quantity: 9 pcs
M3x8 Screws
- Purpose: For PTC heater
- Quantity: 2 pcs
PTC Heater
- Reference: PTC Heater Example
- Note: Must use an AC heater.
20W AC to DC Module
- Reference: AC to DC Module Example
- Note: This module supports temperatures up to 90°C.
Controller (XY-SA10)
- Reference: Controller Example
- Features: Wi-Fi control using Sinilink APK.
⚠ Note: The APK is not supported on the latest Android versions but can be downloaded from apkture. Ensure it is compatible with 2.4GHz Wi-Fi.
12V 8030 Blower Fan
- Specification: 12V
- Maximum Operating Temperature: 70°C
- Recommendation: Due to the fan's maximum operating temperature, it is advised to limit the heater temperature to 70°C for safe operation.
- Product Link: 12V 8030 Blower Fan
Filament for casing
>ABS, ASA, or other options
Requirement: Heat deflection temperature (HDT) above 80°C
I'm using Esun ABS-HT filament (HDT:100°C)
Optional Components
- PT-01 NO (Normally Open) Thermostat
- Purpose: Controls the fan via the AC port of the AC-to-DC module.
- Operating Temperature: 60°C
- Note: I originally used a 55°C thermostat, but the fan stayed on for too long. A 60°C thermostat is recommended for better performance and shorter fan activation times.
+++ added STEP file.. 8030 fan on aliexpress does not have any 3d model so i reverse-engineered it using a scanner attached to a (2d)printer.
