1 / 8
bambulab P1/X1 chamber heater - fast heating chamber heater — image 1
1 / 8

bambulab P1/X1 chamber heater - fast heating chamber heater

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

made my own chamber heater for minimum wattage with best heating efficiency (maybe)

Rating
0 / 5
Likes
55
Downloads
136
Makes
0
Views
3,215
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I'm so busy now so i couldn't make detailed description

i'll update soon

 

The test results show that with an ambient temperature of 8°C, it took 16 minutes to raise the chamber's internal temperature to 60°C, achieved without using the AUX fan.

 

BOM (Bill of Materials)

M3 Insert Nut

  • Outer Diameter (OD): 4.5mm
  • Length: 4.5mm (Other lengths are acceptable)
  • Quantity: 15 pcs

M3x35 Screws

  • Purpose: For 8030 fan
  • Quantity: 2 pcs

M3x5 Screws

  • Purpose: For attaching the heater to the frame of P1/X1
  • Quantity: 2 pcs

M3x5 Countersunk Screws

  • Purpose: For rear cover
  • Quantity: 9 pcs

M3x8 Screws

  • Purpose: For PTC heater
  • Quantity: 2 pcs

PTC Heater

20W AC to DC Module

Controller (XY-SA10)

  • Reference: Controller Example
  • Features: Wi-Fi control using Sinilink APK.
    ⚠ Note: The APK is not supported on the latest Android versions but can be downloaded from apkture. Ensure it is compatible with 2.4GHz Wi-Fi.

12V 8030 Blower Fan

  • Specification: 12V
  • Maximum Operating Temperature: 70°C
  • Recommendation: Due to the fan's maximum operating temperature, it is advised to limit the heater temperature to 70°C for safe operation.
  • Product Link: 12V 8030 Blower Fan

 

Filament for casing

>ABS, ASA, or other options

Requirement: Heat deflection temperature (HDT) above 80°C

I'm using Esun ABS-HT filament (HDT:100°C)

Optional Components

  1. PT-01 NO (Normally Open) Thermostat
    • Purpose: Controls the fan via the AC port of the AC-to-DC module.
    • Operating Temperature: 60°C 
    • Note: I originally used a 55°C thermostat, but the fan stayed on for too long. A 60°C thermostat is recommended for better performance and shorter fan activation times.

 

 

+++ added STEP file.. 8030 fan on aliexpress does not have any 3d model so i reverse-engineered it using a scanner attached to a (2d)printer. 

Tags