Search results: heater

Daihatsu Sirion 1.0 Heater hose Tee Joiner

Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet

Označení kabelů domácího kina / Designation of home theater cables

Potřeboval jsem označit kabely domácího kina. Určeno pro dvoulinku do 8 mm šířky. I needed to label my home theater cables. Designed for two-line up to 8 mm wide.

Ford 2.0L Heater Hose Disconnect Tool

You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…

Heater block Holder for stuck heater for the Nextruder

If your Nextruder heater stucked on block you can use this tool. Place heater block with this tool and hit the protrusion on the heater Then it will be loosen You can use hammer or screw driver CAUTION Please be careful with your hands!

Daihatsu Sirion 1.0 Heater hose Tee Joiner

Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet

Towel hook Clothes radiator heater

This is a very simle print to organise your towels on the radiator. Quick installation, no drilling or gluing required. It can be easily hung Any position on the radiator at different heights and any time intervals.

TARTARUS Heater Core Module! PTC chamber heater enclosure. Top Hat Voron 2.4

…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…

Rugged Heater Bloc Base

NEW VERSION AVAILABLE HERE: MUTUAL AID IS HOT Material: Regular PLA is okay. Avoid especially brittle filaments. ASA, ABS or PETG are preferable. Nozzle Diameter: 0.8 mm Layer Height: 0.3 mm Infill: Turn off Top and Bottom Shells: Turn…

Hammer for theater productions and cosplays

The hammer is not functional it is theater prop, I made it lightweight with exaggerated hammer head to make it more noticeable on stage. There is no any logos on the hammer. Model has two separate parts (the head and the handle) you can…

Prusa Enclosure Heater

All you need is a Creality Filament Dryer 2.0 and some wires, bringing the total cost to just €38 (excluding the filament). The electronics are repurposed from the filament dryer and reused in the enclosure. For the screws, you’ll need 2…

Nozzle Change Heater Block for larger Wrench - E3D V6

See the original model for a full description.

Stratasys Mojo Hood Cheater

Zero Supports! Fast Print Time! Pops Right Into Place! ###PLEASE WATCH YOUR FINGERS### ReedPeak Forge is not liable for any index phalanges lost to the core xy belts Proceed with Caution ⚠

K1C chamber heater

Heated air is directed into the glass without overheating the plastic panels of the printer, the heater power can be adjusted in the settings max_power: 0.6 - if the hot part of the body is printed from Polymaker Fiberon PA6-GF25, if ABS,…

Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock)

Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…

Towel Heater Hanger

A small model to add hangers to my bathroom towels heater. To check if this model will work for you, you have to check 2 measurements on your towel heater : tube diameter : 25mm distance between tubes : 14mm To build it, you need some…

'Mini Heater' Stand w/ Heat Deflector - Strong & Sturdy - Modular Mounting - Centauri Carbon Bambu Lab X1C Chamber Heater PTC Heater

The stand lets you install the heater to either blow upward or blow downward in your machine. Deflector only sits on top of the heater as its facing upward blowing heat towards the top glass. Nothing fancy. The tolerances were perfected…

Stylus direct mount heater block.

This design incorporates patent pending features. The version shown is for illustrative purposes of the key advantage of the Stylus hot end system, the rigid structural mounting of the heater block to a structural elemement of the print…

12V Heater Cover

This is a case/cover for the 12V car heater on amazon. Link is below. Amazon.com: 12V Car Air Heater - Energy Saving PTC Heater, Constant Temperature, 150W : Automotive You will need two m3x8 or m3x10 screws to hold the fanside together…

diesel heater display wall mount

diesel heater display wall mount spojeni pomoci filamentu 1,75mm (jeste jsem netiskl tak mozna nebude uplne ok)

Puller Nozzle Heater and Thermistor Connector Elegoo Centauri Carbon -Updated16Feb26-

Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…

Outside Campers Diesel Heater Holder & Handle

Handle and Hook for VEVOR suitcase diesel heater to mount on the side of an Outside Campers truck camper cap. Secure the handle to the T-channels, then use the hook to hang the diesel heater by the handle from to handle on the cap. May…

Centauri Carbon Cradle for Chitu Mini Heater H2

Description Here is a mounting solution for Chitu Systems Mini Heater H2 inside the Centauri Carbon. Installation This mounts to the M3 threaded hole located on the left side of the printers base. I used Fleeeinlan3D's version of SE3D's…

Heater Vent Lever Knob

A knob for the lever that opens and closes heater vents. The knob fits on to a metal lever that has a mounting post measuring 7.2 x 1.5 x 7 mm. The knob may be difficult to press on, but that's by design. I had to find a flat metal…

Scalable DIY chamber heater

This chamber heater was developed for Elegoo Centauri Carbon printer to print with ABS, ASA, PA6 and other plastics. However, it can be used with any printer that has sufficient internal space in the chamber. The heater operates on 220V…

Odyssey Engine Compartment Cheater Vent Template

Template for cutting cheater vents into the engine compartment hatch. Print in TPU with at least 5 walls on 0.4 nozzle and at least 4 walls on 0.6 nozzle, these thick walls will prevent you from filing and sanding accidents later on. Use…

Heater for Flashforge Adventurer 5M (AD5M), 7530 fan

This heating pad is designed to create an active thermal camera in the Flashforge Adventurer 5M printer. In addition, a module for filtering air through a carbon filter has been added to the heating pad. Print from ABS(ASA)-CF(GF), or…

MILL CONVECTION HEATER

Since Mill doesn't have this part as an available spare part, I had to make it... Printed initially in PLA graphite, as a test model. Fit perfectly

K1Max Chamber heater

The cheap small wall plug-in warmer is sold with many brands (supposes 800W but reality 333W/230V) NOTE! Mains power work , might kill you. The heater unit comes with the all vital parts. You just need 1/2m 5 x wire and two wire mains…

Core One standalone heater 100w

It's been unreasonably cold here in Florida lately, so for the first time, I've had some warping issues printing ASA (my primary filament). Anyways, I also wanted to get slightly higher chamber temps. I had used a single 100w heater in a…

Rugged Heater Bloc - Parametric

This 3D printed base uses less material than other options, and is more rigid, and less likely to have its rings/collars sheer loose from the base. I highly recommend using the 3mf file I included in order to get the correct print…

VW California T6.1 heater deflector for the seat exhaust

A small deflector which can be installed on the exhaust next to the seat / safety belt and redirects the heat away from the intake next to the door - the Webasto will not switch off too early then and the heating is more constant.…

Creality Heater Control Mount for Elegoo Centauri Carbon

I took the Chitu mounting plate, removed the cradle for that remote and added an angled upright with holes for M3 screws. I made the back of the control cradle a little thicker to allow for recessing the M3 screws that attach the cradle…

Chamber Heater v1

Hi thank you for looking at my first ever 3d design. this is a chamber heater to aid in the printer of materials that require a higher temperature in the printer chamber or a printer enclosure. the temperature controller i used comes with…

Prusa CORE One L Chamber Heater

This is an advanced project. This was only designed and tested to work with my needs in mind. My typical designs are tested to ensure they should work for everyone. This is not one of them. You’ll likely need to: Use Fusion 360 to modify…

Round duct for Enclosure heater

Wanted to make a round style air vent to replace the duct from Mike S's setup. Idea was to diffuse the hot air from the heater instead of direct it one way. Really just a way for me to have some fun creating parts and customize my…

Another round duct for Enclosure heater

Wanted to make a round style air vent to replace the duct from Mike S's setup. Idea was to diffuse the hot air from the heater instead of direct it one way. Really just a way for me to have some fun creating parts and customize my…

Chamber heater airflow heating System

Chamber heating system with airflow desgined for any 3d printer use my meanwell 350watt psu case in combination Material list: PTC heater: i use 2x150watt =300watt…

PolyHeater for Core One Polydryer chamber heater - one piece main panel

Take a look at Tom_Ash's original directions on how to properly make this model.

Home Theater Remote Control Wall Mount Holder - Sony RMT-AH200U HT-RT3 HT-RT4 - Lightweight & Strong

Keep your living space organized with this sleek and sturdy wall mount designed for remote controls. This model is optimized to be lightweigt to save filament, yet strong enough to hold your remotes securely. 3 Versions included: -1:…

Chamber Heater holder for Centaur Carbon

Simple to print chamber heater for the creality heater. Printed in petg but ASA or ABS would be fine too. Uses magnets or none needed if mounting on the internal floor up against the wall.

Truma hot water heater vent cover for caravan

A replacement cover for a Truma hot water heater for caravans. Fits nice and snug and operates the same way as the original. Category: Other

Qidi Plus 4 Safer Chamber Heater Mirrored Version

A mirrored version of my safer chamber heater, fan fits correctly. Allows side by side stacking. Perfect for DIY printer projects. Created per community request. Fully remapped back cover plate, half the original size. Printed with…

Volvo 850 Heater Control Knob

A replacement Volvo 850 Heater temperature control knob (driver or passenger side). When I saw that most parts stores wanted $26 for a replacement knob, I decided to make my own 3D-printed design. The knob is not an exact match, but is…

Magnetic Youyoute Heater Mount

Youyoute Heater mount that uses (x4) 6x2mm magnets to attach to the interior of your printer.

Prusa Core One Heater

Important. I will not publish a circuit diagram here. Working with high voltage is dangerous and should only be done with the appropriate expertise. Although I have provided a thermal fuse, I strongly recommend that you do not leave the…

Elegoo Centauri Carbon 2 Chamber Heater

This model allows you to mount the ali style heater to the right side of the CC2. The wire race runs the wires along the side and up to an existing hole in the back. This fully a "no mod" arrangement that does not require any drilling…

Voron 2.4 Under-bed Chamber Heater 5015 Blower Fan Mounts

Mounts for 5015 blowers for Voron 2.4 350mm bed printer with kinematic bed mounts installed. Without the kinematic bed mounts, there probably isn't enough clearance under the bed, so either use a lower fan tilt angle or a different mount…

Bird Bath De-Icer Heater Protective Cover, Winter Birding, Freeze - 3D Printable STL File

Make gardening easier and more fun with this Bird Bath De-Icer Heater Protective Cover, Winter Birding, Freeze Prevention Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…

Bambu A1 Chamber Heater Mount for ENMG CSH8

Print with PC, PPA-CF or other high temp plastics Use full supports not just on build plate If you're making this you'll want to get a PID controller too Needs 4x M5x20 bolts, nuts and washers

Annex K3 chamber heater

you should have: nuts m3x5x6 - 8 screw m3x8/m3x10 - 6 screw m3x12 - 2 ptc heater ceramic 87.5x60x42 250W

Diesel Heater Bracket

Depending on your printers build plate size I would recommend printing it on its side, so you only need support for the top bracket.

Heater Vent Grille

🔥 55 mm Heating Air Vent Grille – For Caravan & Camper Modern and functional air vent grille designed for 55 mm heating air outlets , perfect for ducted heating systems in caravans and campers. Clean, compact and durable design that…

ratrig vcore 4 chamber heater

Ratrig Vcore 4-chamber heater. Two 300W 24V heating elements, one 120mm radial fan, and one thermistor (example from a V6 block, 100K). 16 threaded inserts M3x7. The two large parts should be made of a heatresistant, material (ABS, GF).…

Knob, heater regulator Toyota Corolla 8 (e11*)

Knob, heater regulator for Toyota Corolla 110 (may be suitable for others corolla too) Toyota 55905-02070-B0 and 55905-02070-B1 Only for console as pictured: V1 - custom KNOB V2 - like original

Creality Chamber Heater control mount for Centauri Carbon

Remixed the mount to change angle of controls and add screw holes for self tapping screws. This mount can be screwed into the plastic panel below the door on the centauri carbon. A hole must also be drilled then turned into a slot on the…

3'' dieselheater air splitter / feedtrough

needed something to connect the hose to and break the air stream before entering a distribution box

Diesel Heater air inlet cover

It's an air inlet cover for a diesel heater (cheap chinese clones, probably works on the expensive ones too) Don't leave it on when you start the heater. I printed in TPU on a bambu X1C and it fitted beautifully.

Big Buddy Heater Replacement Knob

This a simple replacement knob for the Big Buddy brand heater.

K2 Plus Heater Clip-on shield diverter diffuser

Easy Snap-On air diverter and shield for the K2 Plus heater to direct it away from the 3D print area. Looking to the few designs out there I did not like the full implementation. 1 - The air should be directed down - away from the…

Replacement Knob for Lasko 754200 Space Heater

Replacement knob for my Lasko 754200 space heater which broke years ago. I feel this replacement is a bit better than the original as the power/speed control switch requires a bit of force and this knob offers a nicer grip. I printed mine…

Smart Automatic Chamber Heater for Prusa Enclosure

Still under development. Check original creator for more information. I will not get into every detail of this project since original creator made a lengthy and quite detailed description of this project and explained it very well. This…

The Voron 2.4 350 Carbon Filter That Doubles as a Chamber Heater

Most carbon filters sit inside the chamber, where the heat slowly cooks the activated carbon and shortens its life. This one mounts externally on the rear panel of the Voron 2.4 350mm (LDO kit) — the carbon stays cool, and the filtered…

Prusa Core One - Creality Chamber Heater Side Panel Cover

Added an additional cover to clean up the look and have a surface to paste the controller board. Made changes to the part splitting, using an M3 bolt and the existing bolt patterns to hold the parts together. Printed in ASA for both…

Chitubox 250w heater mount

This is a heater mount for the Chitubox 250w heater, angled in such a way, so it blows heat towards the opposite end. Mounted to the rear, back enclosure panel for the Sovol SV08, lower left hand side. I use a custom 3d printed enclosure…

Halterung für Chitu-Mini-Heater-H2 im Snapmaker U1

Diese praktische Halterung wurde speziell für die sichere und optimale Positionierung eines Chitu Mini Heater H2 im Snapmaker U1 entworfen. Sie ermöglicht eine stabile Befestigung und sorgt gleichzeitig für eine gezielte Luftführung…

75mm Chinese Diesel Heater Quick Connect Duct System

I developed this series to address the limited options for diesel heater ducting components. While I came across similar concepts, I couldn't find anyone offering a quick-connect, quick-release design with a cap. I printed these parts in…

Electronics Box for Chamber Heater

A simple Core One Mod for Lazy people who wanna have a Chamber Heater without a lot of wiring. The Only Cable you probaply need to cut and reconnect later ist the main power cable, so you can fit it trough a smaller hole in the side…

60mm camping heater 90 degree bend with mounting plate

This is a 90° bend for the warm or cold air line of a dieselheater. can be sued for other purposes of course. its supposed to be connected to 60mm inner diameter tubes that came with my heater. I tried ABS but it got too hot and went…

flat fan heater handle

just a few handles for some common heaters, so that the heater can be turned on and off easily, as well as be able to be turned on while being under a desk/table, with the handle sticking out a bit. The handle for the 1st image heater…

Fiat 131 Sport 1977-1980 – Heater valve cable retaining clip

A good friend asked me to help fix a broken clip. I traced the outlines in Fusion 360 using a scaled photo. The teeth could be improved, but they get the job done!

The "NUMMI-Worker’s Spite" 5.5mm Thumb Drive Set for Pontiac Vibe/Toyota Matrix Cabin Air Mix/Heater Air Door Actuator removal 1572794

NEW ITEM ACQUIRED! Item Name: The "NUMMI-Worker’s Spite" 5.5mm Thumb Drive Set Quality: Common/Disposable (But worth its weight in gold when your knuckles are bleeding.) Description: Oh, look! Another Shade Tree Mechanic who thinks…

Flashforge AD5X chamber heater

This is a chamber heater I designed for the Flashforge AD5X with Fusion. I took measurements off my enclosure, bought a heater and got to work. Your fitment may vary depending on how much variance the heater, acrylic and enclosure…

2018 rav 4 seatbelt cheater

use at own risk disables the chime when off roading

PTC Heater holder for Rat Rig Vcore 3.1

Adax panel heater cover

I made this cover for my panel heaters to dim the light from the display. It also makes it look a bit nicer I think. It's designed to fit quite snugly onto the display, so if it doesn't fit you might need to scale it up a little bit.

EVO 8 / 9 Heater Core Blend Door Gear

be sure to print at a 45* angle so there is no shear force on the stud.

Audio Theater indoor drumline logo

this is the indoor drumline Audio Theaters logo, one with a hole one without. these are rough and rather large but can be scaled and easily changed.

Creality Chamber Heater Remote Mount

Simple Mount/Holder for Creality Chamber Heater Remote with two M3 Mounting Tabs.

Chitu Systems 200W Chamber Heater Remote Holder

Simple Mount/Holder for Chitu Systems 200W Chamber Heater Remote with two M3 Mounting Tabs.

BMW S14 coolant pipe to heater core

P/N 11531309756

Curtain holder for radiator (heater) with clip

A practical solution for keeping your curtain clear of the radiator, allowing heat to flow freely into the room rather than getting trapped behind the fabric. The holder clips into radiators that have the top grille slots 10mm apart, the…

Filament dryer - Fan and heater bracket

This is a model used for mounting a fan to a ptc heater. There is also space to mount a wire connector and a thermal fuse. - For easier access to screw holes (3mm diameter), mount the bracket to target surface before doing anything else…

The 100 Bed Mounting Template for custom heater bed builds

This template can be used to help align the mounting holes on a custom aluminum plate. Mounting holes align with the default The 100 3D printer bed hardware.

Hummingbird Feeder Heater Redesign

Simple 3D printed bulb holder to head a hummingbird feeder. I used this lamp socket and cord from Lowes because that's what I could get my hands on same-day Project Source 60-Watt Plastic Turn Knob Lamp Socket, Clear in the Light Sockets…

Porsche 944 Heater Control Facia

A reproduction of the 944 heater plate. I found other recreations like the ones on OctoClassic are far too expensive for the quality they give you so I made this one. It is designed to be printed face down on a textured build plate to…

Inclined PTC heater stand

I modified the original Heater Stand for PTC Heater design by @indymusician_238719 because my PTC heater measured 80x80mm and I wanted to keep it slightly tilted to direct the heat more towards the center of my Original Prusa Enclosure.…

Kallax Theater Screen

This design uses some lying around screws, an old sheet and a cheap dowel to create an hand cranked theater that fits any living room. The design is very straight forward. If you'd like to watch a movie, simply pull the dowel to the left…

PNEUMATIC WATER HEATER SEDIMENT CLEANER

**USE AT YOUR OWN RISK! I am not responsible for any use of this item. You can cause thousands of dollars in water damage, get serious burns, or be electrocuted when working around water heaters. This is ONLY for people with experience…

Oxford Heaterz Heated Grips Temp Controller Handlebar Mount

This is an alternate controller mount for the Oxford Heaterz Heated Grips Temp Controller. The included mount did not work well on the KTM Adventure 390 handlebar. This mount should also work on any handlebar with a 22mm diameter. It was…

Ender 3 v2 hidden space saving bed heater cable strain relief

A redesigned strain relief for the heater bed cable, tucking it out-of-sight under the bed. If you've removed the power supply and electronics like me, this allows you to place the printer right up against the wall or within really tight…

Označení kabelů domácího kina / Designation of home theater cables

Potřeboval jsem označit kabely domácího kina. Určeno pro dvoulinku do 8 mm šířky. I needed to label my home theater cables. Designed for two-line up to 8 mm wide.

Theater Of Dionysus

hi

Resin printer heater

This is a remix of ANYCUBIC MONO X HEATER by JVJV - Thingiverse I found that there was a need for more room inside for cable management, so I have extended the compartment for the thermostat. Text below is copied from the original…

Holder for JBL Protemp e300 aquarium heater

A simple holder for the Protemp e300 aquarium heater from JBL. The heater is inserted into the holder and can be fixed in place with a drop of hot glue if required. The holder itself is then screwed vertically into the aquarium base…

Pompeii Amphitheater

This is a very simple and fast to print model of a pompeii amphitheater. Prints around 2 hours but may very on different computers.

Reer Baby Changing Table Heater Mount V2

Additional Parts: 4 x M6 x 50 mm L-screws: https://www.ebay.de/itm/123620430705?var=424477351005 4 x M6 cap nuts 4 x M4 x 35 mm allen screw 4 x M4 hex nuts 4 printed M6 knobs Print: GreenTechPro or other stiff material a few Support

Elegoo Heater Mod

This mod is designed to do FOUR things. Reduce the vibration of the heater in the printer. Strengthen the mounting of the heater Force the Heater to pull cold air from below the VAT as not to disturb the resin. Pipe the Heat above the…

držák na žebříkové topení / radiator heater towel holder

držák na žebříkové topení 20mm

block heater knob

block heater knob

PTC heater + STC1000 housing

For those, who wants housing blank (without logo).