Centauri Carbon Cradle for Chitu Mini Heater H2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic mount for the Chitu Mini Heater
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 245
- Makes
- 2
- Views
- 1,719
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Description
Here is a mounting solution for Chitu Systems Mini Heater H2 inside the Centauri Carbon.
Installation
This mounts to the M3 threaded hole located on the left side of the printers base. I used Fleeeinlan3D's version of SE3D's 7.5mm panel spacer to bump out the left side panel so I could route the power and control cables outside of the printer. The wire relief they added worked out nicely.
Since I had to use M3x12 screws to mount the spacer, I used one of the stock M3x4 screws that were replaced to fasten the cradle. The threaded hole at the base of the printer has something below it requiring a short screw.
If you have a different solution for routing the cables or can't get your hands on a M3x4 screw, I've uploaded a step file so you can adjust the mounting tab thickness to work with what you have for screw lengths.